Auto-Standby
Sets whether to automatically switch the unit to the standby mode when
there is no audio input and no operations are performed for more than 15
minutes.
Off
(Default):
Disable Auto Standby mode.
On: Enable Auto Standby mode.
0
The display will show the remaining time for three minutes before the units enters
standby mode.
0
In F.C.B.S. connection, only the ID “Leader” unit activates Auto Standby mode. If
the ID “Leader” unit is operated with no audio input, set the Auto Standby mode to
off.
Contents
Connections Playback Settings Tips Appendix
51
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
