Need help?Do you have a question about the Marantz 2215 and is the answer not in the manual?
General| Power Output | 15 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.8% |
| Damping Factor | 45 |
| Input Sensitivity | 2.2mV (MM), 180mV (line) |
| Tuning Range | FM, MW |
| Output | 180mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Semiconductors | 24 x transistors |
| Dimensions | 440 x 137 x 365mm |
Details on units comprising the chassis and their board locations.
Procedure for aligning AM IF transformer cores for optimal response.
Steps for aligning AM frequency range and tracking.
Explanation of solid-state muting and auto-stereo switching circuits.
Description of the MPX stereo decoding circuit for channel separation.
Troubleshooting steps for no FM reception, checking local oscillator and circuits.
Troubleshooting steps for lack of stereo separation, checking pilot signals.
Technical specifications for audio output, distortion, and frequency response.
Technical specifications for FM reception sensitivity, selectivity, and separation.
General specifications including power requirements, dimensions, and weight.
To Next Page
