Need help?Do you have a question about the Marantz 2215B and is the answer not in the manual?
Details units mounted on printed circuit boards and their respective P.W. board designations.
Steps for aligning AM IF, frequency range, and tracking for optimal performance.
Detailed steps for aligning the FM tuner section, including IF and discriminator adjustments.
Procedure for aligning stereo separation for balanced channel output.
Procedure for setting the FM muting circuit threshold level.
Steps for adjusting audio output levels for optimal performance in both channels.
Technical specifications for the receiver's amplifier section, including power and distortion.
Technical specifications for the preamplifier section, covering input sensitivity and RIAA response.
Technical specifications for the FM tuner, including sensitivity, selectivity, and distortion.
Details units mounted on printed circuit boards and their respective P.W. board designations.
Steps for aligning AM IF, frequency range, and tracking for optimal performance.
Detailed steps for aligning the FM tuner section, including IF and discriminator adjustments.
Procedure for aligning stereo separation for balanced channel output.
Procedure for setting the FM muting circuit threshold level.
Steps for adjusting audio output levels for optimal performance in both channels.
Technical specifications for the receiver's amplifier section, including power and distortion.
Technical specifications for the preamplifier section, covering input sensitivity and RIAA response.
Technical specifications for the FM tuner, including sensitivity, selectivity, and distortion.
General| Power Output | 15 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.5% |
| Tuning Range | FM, MW |
| Damping Factor | 45 |
| Input Sensitivity | 2.2mV (MM), 180mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Total Harmonic Distortion Reduced | 0.3% |
| Semiconductors | 13 diodes |
To Next Page
