Need help?Do you have a question about the Marantz 2265 and is the answer not in the manual?
General| Power Output | 65 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.1% |
| Damping Factor | 45 |
| Input Sensitivity | 2.2mV (MM), 180mV (line) |
| Tuning Range | FM, MW |
| Speaker Load Impedance | 4Ω to 16Ω |
Procedure for aligning the AM Intermediate Frequency transformer L153 for optimal response.
Steps to align AM frequency range and tracking using signal generator and tuning capacitor.
Procedure to set AM signal generator for 90% signal strength meter reading.
Detailed steps for FM alignment, including oscillator coil and capacitor adjustments.
Procedure to align stereo separation using FM SG and frequency counter for optimal channel separation.
Steps to adjust muting circuit using VTVM and FM SG for proper side response muting.
Schematic and component layout for the FM Front End and AM Tuner Assembly (P100).
Schematic and component layout for the AM Tuner Assembly (P150).
Schematic and component layout for the FM IF Amplifier, Detector, Muting Control, and Meter Unit (P200).
Schematic and component layout for the MPX Stereo Decoding Amplifier (P300).
Comprehensive schematic diagram of the Marantz Model 2265.
Detailed list of all parts used in the Marantz Model 2265.
To Next Page
