Need help?Do you have a question about the Marantz 2216 and is the answer not in the manual?
Procedure for adjusting the Intermediate Frequency (IF) transformers for optimal AM reception.
Steps for tuning and aligning the AM frequency range and tracking.
Schematic and component layout for the FM/AM tuner board (P100).
Schematic and component layout for the EQ amplifier board (P400).
Procedure for adjusting the Intermediate Frequency (IF) transformers for optimal AM reception.
Steps for tuning and aligning the AM frequency range and tracking.
Schematic and component layout for the FM/AM tuner board (P100).
Schematic and component layout for the EQ amplifier board (P400).
General| Power Output | 16 watts per channel into 8Ω (stereo) |
|---|---|
| Tuning Range | FM, MW |
| Speaker Load Impedance | 4Ω to 16Ω |
| Input Sensitivity AUX | 150mV |
| Signal-to-Noise Ratio MM | 75dB |
| Signal-to-Noise Ratio DIN/AUX | 85dB |
| Total Harmonic Distortion | 0.5% |
| Input Sensitivity | 2.2mV (MM), 150mV (line) |
To Next Page
