Need help?Do you have a question about the Marantz 2235 and is the answer not in the manual?
Procedure for aligning the AM Intermediate Frequency (IF) circuit.
Steps for aligning the AM frequency range and tracking circuits.
Procedure to adjust the signal strength meter for AM tuning.
Detailed steps for aligning the FM tuner section across its frequency range.
Steps for aligning FM coils and IF transformers for minimum distortion.
Procedure for adjusting the discriminator transformer for center tuning meter.
Procedure to adjust signal strength meter for FM tuning.
Steps to adjust for maximum and same separation in both stereo channels.
Procedure for aligning the AM Intermediate Frequency (IF) circuit.
Steps for aligning the AM frequency range and tracking circuits.
Procedure to adjust the signal strength meter for AM tuning.
Detailed steps for aligning the FM tuner section across its frequency range.
Steps for aligning FM coils and IF transformers for minimum distortion.
Procedure for adjusting the discriminator transformer for center tuning meter.
Procedure to adjust signal strength meter for FM tuning.
Steps to adjust for maximum and same separation in both stereo channels.
General| Power Output | 35 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.3% |
| Tuning Range | FM, MW |
| Damping Factor | 45 |
| Input Sensitivity (line) | 150mV |
| Speaker Load Impedance | 4Ω to 16Ω |
| Semiconductors | 3 x IC |
| Weight | 12kg |
To Next Page
