Need help?Do you have a question about the Marantz 2252B and is the answer not in the manual?
General| Power Output | 52 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.1% |
| Tuning Range | FM, MW |
| Damping Factor | 45 |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 90dB (line) |
| Dimensions | 440 x 365mm |
| Input Sensitivity | 180mV (line) |
| Semiconductors | 3 x IC |
Explains the purpose and connection of phono jacks, including troubleshooting hum.
Details the function of IN and OUT jacks for connecting tape recorders.
Explains the use of the included ribbon antenna and connection methods.
Describes the PRE OUT and MAIN IN jacks for connecting external processors.
Explains connecting two pairs of loudspeakers to the SPEAKER SYSTEM terminals.
Provides a detailed test procedure to ensure proper speaker phasing for optimal sound.
Instructs on plugging the unit into an AC outlet and cautions against DC outlets.
Provides a checklist to ensure all signal connections are made correctly before operation.
Advises on using qualified service technicians for repairs and calibration.
Details the FM antenna signal path, RF amplifier, and mixer stages.
Explains the FM IF amplifier system, including ICs, filters, and discriminator.
Describes the stereo composite signal processing using PLL technique.
Describes the amplifier section's direct-coupled, full complementary circuit.
Offers hints for common operational problems and when to seek service.
Details power output, distortion, impedance, and frequency response for the amplifier.
Lists specifications for phono and high-level inputs, noise, and output levels.
Covers sensitivity, quieting, distortion, selectivity, and separation for FM reception.
Details sensitivity, distortion, signal-to-noise ratio, and selectivity for AM reception.
To Next Page
