Need help?Do you have a question about the Marantz 2240B and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Power Output | 40 watts per channel into 8Ω (stereo) |
| Total Harmonic Distortion | 0.3% |
| Signal to Noise Ratio | 85dB (line) |
| Speaker Impedance | 4 to 16Ω |
| Tuning Range | FM: 88 - 108 MHz |
| Semiconductors | Transistors, Diodes |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
Details steps for aligning the AM IF, frequency range, tracking, and signal strength meter.
Provides steps for aligning FM IF, oscillator, discriminator, and signal strength meter.
Outlines the procedure for adjusting stereo separation for optimal performance.
Describes the process for aligning the FM muting circuit.
Covers voltage, DC offset, idle current, and phono amplifier adjustments.
Details performance specifications for the audio circuits.
Details performance specifications for the FM sections.
Instructions for converting the unit to different voltage settings.
To Next Page
