Marantz 40n - Playing Digital Input Sources

Playing digital input
OPTICAL
COAXIAL
HDMI ARC
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting to a
device with digital audio connectors” (v p. 25))
2
Press HDMI ARC, COAXIAL or OPTICAL to switch the
input source to “HDMI ARC”, “COAXIAL” or “OPTICAL”.
3
Play the component connected to this unit.
0
If the sampling frequency cannot be detected, “Unlocked” will be
displayed.
0
“Unsupported” is displayed when audio signals that are not
supported by this unit are input.
Contents Connections Playback Settings Tips Appendix
40
Front panel Rear panel
Remote control
unit
Index