Marantz 6300 - Page 10

4.
SERVICE
NOTES
4-1.
VOLTAGE
CONVERSION
FOR
EUROPEAN
MODEL
The
European
version
of
the
Model
6300
is
equipped
with
a
universal
power
transformer
that
may
be
adjusted
to
operate
at
110V,
120V,
220V,
or
240V
AC
at
50
to
60
Hz.
For 120V Operation
For 110V Operation
4-2. CARTRIDGE WIRE COLOR CODE
Before a cartridge is screwed into the shell, the small clips
at the ends of the wires in the tone arm cartridge shell
should be pushed onto their corresponding cartridge con-
nection pins.
TONE ARM CARTRIGES SHELL
— WIRE COLOR CODE —
RIGHT CHANNEL HOT ......... RED
RIGHT CHANNEL GROUND..... GREEN
LEFT CHANNEL HOT .......... WHITE
LEFT CHANNEL GROUND ...... BLUE
The cartridge or its accompanying technical sheet will
identify the cartridge connection pins. It may be necessary
to slightly compress the terminal clips with your fingers to
make them fit snugly on the prongs of some cartridges.
6
To convert the unit to a different power source voltage,
reposition conversion plug as shown in the illustration
below.
CAUTION: DISCONNECT POWER SUPPLY CORD
FROM AC OUTLET BEFORE CONVERT-
ING VOLTAGE.
Rt
For 240V Operation
For 220V Operation
4-3. REPLACEMENT PARTS/TECHNICAL ASSIST ANCE
1. REPLACEMENT PARTS
Turntable replacement parts may be ordered by writing to;
MARANTZ COMPANY, INC.
PARTS DEPARTMENT
P.O. BOX 577
CHATSWORTH, CALIFORNIA 91311 USA
2. TECHNICAL ASSISTANCE
Inquiries regarding the operation and servicing of Narantz
equipment should be directed to;
MARANTZ COMPANY, INC.
TECHNICAL SERVICES DEPARTMENT
P.O. BOX 577
CHATSWORTH, CALIFORNIA 91311 USA