K
kylesanchezAug 17, 2025
How to enable DTS sound output on a Marantz AV7005 Tuner?
- TTonya WileyAug 17, 2025
To resolve the issue of no DTS sound output from your Marantz Tuner, set “Decode Mode” on the menu to either “Auto” or “DTS.”
To Next PageTo Next Page
How to enable DTS sound output on a Marantz AV7005 Tuner?
To resolve the issue of no DTS sound output from your Marantz Tuner, set “Decode Mode” on the menu to either “Auto” or “DTS.”
Why Dolby TrueHD, DTS- HD, Dolby Digital Plus audio is not output on my Marantz Tuner?
To get Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio from your Marantz Tuner, ensure you are using HDMI connections.
What to do if there is no audio output from my Marantz Tuner?
If you're not getting any sound from your Marantz Tuner, here are a few things to check: * Make sure all your device connections are secure. * Verify the speaker connections are correct. * Ensure the audio device is powered on. * Adjust the master volume to an audible level. * Deactivate mute mode, if it's enabled. * Select the appropriate input source and mode. * Ensure headphones are disconnected.
What to do if there is no video output with HDMI connection on my Marantz AV7005?
If you're not getting any video output via HDMI on your Marantz Tuner, try these steps: 1. Check the HDMI connector connections to ensure they are secure. 2. Make sure the input source on the tuner matches the connected HDMI connector. 3. Verify that your TV is compatible with HDCP copyright protection, as incompatible devices may prevent proper video output.
Why is there no audio output with HDMI connection on my Marantz Tuner?
If you're experiencing a lack of audio output with an HDMI connection on your Marantz Tuner, consider the following: * Verify the HDMI connector connections are secure. * If you want audio from the speakers, set “HDMI Audio Out” on the menu to “AMP.” * If you want audio from the TV, set “HDMI Audio Out” on the menu to “TV.”
What to do if no sound is produced from the subwoofer connected to my Marantz AV7005?
If you're not getting any sound from the subwoofer connected to your Marantz Tuner, check these: * Ensure the subwoofer connections are correct. * Make sure the subwoofer is powered on. * In the menu, set “Speaker Config.” – “Subwoofer” to “Yes.” * If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected surround mode.
Why does no picture appear on my Marantz AV7005 Tuner?
If no picture appears when using your Marantz Tuner, check the TV connection and ensure the TV input is set correctly.
How to turn on the display on a Marantz AV7005?
If the display on your Marantz Tuner is off, go to the menu and set “Display” to something other than “OFF”.
What to do if no sound is produced from surround back speaker on my Marantz AV7005?
If there's no sound coming from the surround back speaker with your Marantz Tuner, try the following: * Set “Amp Assign” on the menu to “Normal.” * Ensure “Speaker Config.” – “S.Back” on the menu is set to something other than “None.” * Make sure the surround mode is set to something other than “STEREO.”
Why is there no sound produced from front height speaker on my Marantz AV7005 Tuner?
If you're not hearing sound from the front height speaker connected to your Marantz Tuner, make sure that: * “Amp Assign” on the menu is set to “Normal.” * “Speaker Config.” – “F.Height” on the menu is set to something other than “None.”
General| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | - % |
| AC (power) in | Yes |
| Audio (L/R) in | 7 |
| Audio (L/R) out | 6 |
| USB 2.0 ports quantity | 1 |
| Digital audio optical in | 3 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Cables included | AC |
| Connectivity technology | Wired |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 750 W |
| THX-certified | No |
Weight and Dimensions| Depth | 406400 mm |
|---|---|
| Width | 440 mm |
| Height | 184.5 mm |
| Weight | 13000 g |
