o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 88
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 156
0
“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
248
The power to this unit does
not turn off when you press
the Power operation
button. “ZONE2 On” or
“ZONE3 On” appears on
the display.
0
Power in either ZONE2 or ZONE3 is on. To turn off the power of this unit (standby), press the ZONE2
ON/OFF or ZONE3 ON/OFF button on the main unit or press the ZONE SELECT button on the remote
control unit to select a “ZONE2” or “ZONE3”, then press POWER X button on the remote control unit.
-
The power to this unit does
not turn off when you press
the Power operation
button. “HEOS On”
appears on the display.
0
A HEOS device on the same network is playing an input source from this unit. Stop playback on the
HEOS device when turning this unit off (setting it to standby). The power of this unit will turn off
automatically after around 20 minutes.
-
Contents Connections Playback Settings Tips Appendix
274
Front panel Display Rear panel Remote Index