Setting the remote control operation
mode to network CD player operation
mode
1
Press and hold the ENTER and number 2 button on the
remote control unit down together for more than 5
seconds.
0
“Variable Out” in the menu must also be set to “On” to adjust the volume of the
audio signal output from the analog audio output connectors (VARIABLE).
(v p. 98)
Setting the remote control operation
mode to amplifier operation mode
1
Press and hold the ENTER and number 1 button on the
remote control unit down together for more than 5
seconds.
Contents Connections Playback Settings Tips Appendix
110
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
