To Next PageTo Next Page
Need help?Do you have a question about the Marantz PM7000/N1G and is the answer not in the manual?
Provides guidelines and contact details for ordering replacement Marantz parts.
Details power output ratings, IHF dynamic power, and distortion specifications.
Lists input sensitivity, impedance, frequency response, and tone control characteristics.
Covers power requirements, dimensions, weight, and included accessories.
Lists essential test equipment and their functions for servicing the unit.
Diagram of the TMP47C200BM microprocessor and its pin assignments.
Schematics for input switching, tape functions, and the power supply section.
Diagrams illustrating the front panel controls, main signal path, and tone control circuits.
Schematics for speaker selection, rotary encoder, and motorized volume control.
Assembly drawings for Tone, Front, and Speaker Switch boards.
Schematics for the volume control and main/speaker protection boards.
Visual representation of the unit's internal and external parts for identification.
Procedure to adjust quiescent current for Class AB amplifier operation.
Procedure to adjust quiescent current for Class A amplifier operation.
Steps to adjust DC offset voltage at the speaker output terminals.
Lists common part codes, safety warnings, and abbreviations used in the manual.
Detailed parts lists for various circuit boards, including resistors, capacitors, and semiconductors.
Provides guidelines and contact details for ordering replacement Marantz parts.
Details power output ratings, IHF dynamic power, and distortion specifications.
Lists input sensitivity, impedance, frequency response, and tone control characteristics.
Covers power requirements, dimensions, weight, and included accessories.
Lists essential test equipment and their functions for servicing the unit.
Diagram of the TMP47C200BM microprocessor and its pin assignments.
Schematics for input switching, tape functions, and the power supply section.
Diagrams illustrating the front panel controls, main signal path, and tone control circuits.
Schematics for speaker selection, rotary encoder, and motorized volume control.
Assembly drawings for Tone, Front, and Speaker Switch boards.
Schematics for the volume control and main/speaker protection boards.
Visual representation of the unit's internal and external parts for identification.
Procedure to adjust quiescent current for Class AB amplifier operation.
Procedure to adjust quiescent current for Class A amplifier operation.
Steps to adjust DC offset voltage at the speaker output terminals.
Lists common part codes, safety warnings, and abbreviations used in the manual.
Detailed parts lists for various circuit boards, including resistors, capacitors, and semiconductors.
General| Channels | 2 |
|---|---|
| Output Power (8 ohms) | 60 W |
| Output Power (4 ohms) | 80 W |
| Frequency Response | 5 Hz - 100 kHz |
| Analog Inputs | 4 |
| Subwoofer Output | Yes |
| Headphone Output | Yes |
| Streaming Services | No |
| Wi-Fi | No |
| Ethernet | No |
| Input Sensitivity | 200 mV |
| Damping Factor | 100 |
| Input Impedance | 47 kΩ |
| Total Harmonic Distortion (THD) | 0.02% |
| DAC Chip | AKM |
| Digital Inputs | Optical, Coaxial |
| Phono Input | Yes (MM) |
| Dimensions | 440 x 370 x 105 mm |
