33
MODEL PM7200 TECHNICAL SPECIFICATIONS
Power output (class AB operation)
RMS 8 ohms (20 Hz-20 kHz) .......................................................................................................... 95 W
DIN 8 ohms .................................................................................................................................... 105 W
THD at 8 ohms RMS rated output ................................................................................................ 0.03%
Damping factor................................................................................................................................... 150
Power output (classA operation)
RMS 8 ohms (20 Hz-20 kHz) .......................................................................................................... 25 W
DIN 8 ohms ...................................................................................................................................... 28 W
THD at 8 ohms RMS rated output ............................................................................................... 0.03 %
Damping factor................................................................................................................................... 150
IHF dynamic power (class AB operation)
8 ohms ............................................................................................................................................ 120 W
IHF dynamic power (classA operation)
8 ohms .............................................................................................................................................. 35 W
Magnetic cartridge input
Input sensitivity impedance......................................................................................... 2.5 mV/47 kOhm
Accuracy of frequency response to IEC RIAA ............................................................................. 0.5 dB
Signal to noise ratio ........................................................................................................................ 85 dB
Tuner/CD/Aux/Tape inputs
Input sensitivity impedance........................................................................................ 150 mV/40 kOhm
Signal to noise ratio ........................................................................................................................ 88 dB
Frequency response (–1 dB limits, Source Direct) ........................................................10 Hz - 50 kHz
Tone characteristic (100 Hz and 10 kHz) ...................................................................................... ±8 dB
Channel separation (1 kHz/10 kHz, Source direct) ...........................................................
>80/>70 dB
General
Power Requirements ........................................................................................................... 120V, 60 Hz
Dimensions
Width ...................................................................................................................................... 440 mm
Height..................................................................................................................................... 159 mm
Depth ..................................................................................................................................374.5 mm
Weight
Unit alone ............................................................................................................................... 12.3 kg
Specifications subject to change without prior notice.