Marantz PMD660 Guide

3
Steps for selecting Presets:
1. With the PMD 660 at Stop, Push the Menu/Store Edit button
2. Push the << or >> button to choose Preset-1 (or 2, or 3)
3. When the LCD reads Preset-1 with the “1” ashing
Press the Menu/ Store Edit button.
The LCD will briey read “Executing” and then “Completed.”
Plugging in Headphones
You may plug in headphones using the 1/8 inch jack on the front of the unit.
This is a good idea before you start recording so that your microphones do
not feedback with the built in speakers.
Plugging in Microphones
You may plug a stereo microphone with Left and Right male XLR cables
into the “L” and “R” XLR Inputs on the back side of the unit.
Setting Levels:
The level meter must NEVER touch the 0dB mark. If it does the signal will be clipped.
The best record level is when the meter goes as close to it but never over it.
1. Press REC PAUSE
2. Set recording levels using the REC LEVEL controls
on the front side of the unit.
The inside control (Right Channel) and outside
control (Left Channel) turn together unless you hold
one while turning the other.
0dB

Marantz PMD660 Specifications

General

Brand	Marantz
Model	PMD660
Category	Voice Recorder
Language	English