8
This description assumes that you have recorded sound onto the PMD660 Flash
RAM and are ready to transfer it to your Powerbook.This process is essentially a le
transfer from the PMD660 to a Macintosh hard drive and then an import.The process
is as follows:
1 • Plug the PMD660 into the wall • You may use the DC 9v power supply provided with the unit.
Do not turn the unit on yet.
2 • Plug the PMD660 into the USB port of your Powerbook • Plug the supplied USB cable into the
USB Port on the PMD660 and the other end into the USB port on the left side of your Powerbook.
3.• While pressing and holding the Copy/USB Button on the top of the PMD660, switch
the power switch on the side of the PMD660 into the ON position • The LCD should read ‘USB.’
4 • A new drive will show up on the desktop • In this case the drive is called ‘NO NAME’
This is the lash RAM card inside of the PMD660. Double click it.
Importing Audio onto a Powerbook from a Marantz PMD660 Digital Recorder:
Marantz
PMD660
Mac OSX
Power Switch
Copy/USB Button
USB Port
DC In 9v
LCD
5 • Open the MPGLANG1 folder • Double click the ‘MPGLANG1’ folder. This is the folder that contains
the audio you have recorded on the PMD 660.
The ‘MPGLANG1’ Directory
To Next Page
Loading...
