Marantz RC3001 - Page 23

18
ENGLISH
4.
Press a button next to the “EVERYDAY” or
“ONE TIME” indicators on the LCD to set
timer operation to either everyday or one-
time only operation.
• The timer settings are displayed. Check
that the settings are correct.
Setup time
Device name
HARD or SOFT
button
Key name
EVERYDAY or
ONE TIME
• Either press the ENTER button or wait
three seconds so that “COMPLETED” is
displayed on the LCD and the operation
settings are automatically completed.
• Either press the ENTER button or
wait three seconds for the LCD to
automatically return to the MAIN menu.
3.
Home mode is shown in the LCD. Select the
commands and devices for the commands
that will be sent by timer programming.
• If a command assigned to the
HARD button is to be sent by timer
programming, press the HARD button
when selecting the command to make
the setting.
• If a command assigned to the
SOFT button is to be sent by timer
programming, use the < and > buttons
when selecting the command to move
the page, and select the command
assigned to the SOFT button.
Note:
The timer setting for the SOFT button cannot be
used in Home mode.
RC3001E01ENG.indd18RC3001E01ENG.indd18 07.8.311:04:43PM07.8.311:04:43PM