The Outlaws’ Guide to the Marantz SR5004
Marantz SR5004
23_
Video Setup
The Video Setup menu provides control over the video switching and video processing
features of the SR5004.
Video Setup Menu
The first item in the Video Setup menu is the Video Convert sub-menu. This sub-menu
determines how each input’s video signal is converted and output from the SR5004’s
HDMI, component, and composite video outputs.
Video Convert Sub-Menu
Each input can be adjusted independently, and each has three options:
“Analog&HDMI”, “Analog Only”, and “Off”. The options are described below.
Analog&HDMI: Any analog signal (component video, composite video, and the
front panel S-video) is up-converted and/or down-converted so that it is available
at all analog video outputs. It also converts all analog video inputs to digital so
they may be output via HDMI.
To Next Page
Loading...
