Need help?Do you have a question about the Marantz SR5009 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Pre-out connectivity | Yes |
| Audio output channels | 7.2 channels |
| Power output per channel (1KHz@6 Ohm) | 180 W |
| Power output per channel (20-20KHz@8 Ohm) | 100 W |
| HDMI in | 8 |
| Audio (L/R) in | 5 |
| Composite video in | 3 |
| USB ports quantity | 1 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 2 |
| Audio (L/R) out | 0 |
| Connectivity technology | Wired |
| Speakers connectivity type | Clamp terminals |
| Audio formats supported | AAC, AIFF, FLAC, MP3, WAV, WMA |
| Supported radio bands | AM, FM |
| Internet radio services supported | vTuner |
| Optical drive included | No |
| 3D | - |
| Supported video modes | 1080p |
| Supported graphics resolutions | 3840 x 2160, 1920 x 1080 (HD 1080) |
| Product color | Black |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 650 W |
Weight and Dimensions| Depth | 346 mm |
|---|---|
| Width | 440 mm |
| Height | 161 mm |
| Weight | 10300 g |
Details on the effective distance and angle for operating the remote control.
Description of the receiver's audio performance and discrete circuit technology.
Details on 4K 60Hz input/output and advanced image processing capabilities.
Step-by-step instructions for initial setup via the TV screen.
Description of the unit's GUI for improved operability.
Diagram and labeling of all front panel controls and indicators.
Identification of input/output connectors and terminals on the rear panel.
Buttons to switch the operating zone between MAIN ZONE and ZONE2.
Guidance on determining speaker system and installing speakers in a room.
How to power the unit on and switch it to standby mode.
Methods for selecting the desired input source for audio/video playback.
Changes input connector assignments for HDMI, digital, analog, component, and video sources.
Sets audio input modes and decode modes for each input source.
Adjusts center channel output level to clarify dialogue.
Adjusts the volume level for the subwoofer.
Calibrates audio system for optimum performance based on room measurements.
Sets where to display the volume level: Bottom, Top, or Off.
Changes input connector assignments for HDMI, digital, analog, component, and video sources.
Sets audio input modes and decode modes for each input source.
Guide for performing automatic room acoustic measurement and speaker optimization.
Displays network information like Friendly Name, Connection, IP Address, MAC Address.
Choosing between wireless LAN (Wi-Fi) or wired LAN connection.
Selecting automatic network configuration from router or manual setup.
Sets the display language for the menu on the TV screen.
Configures ECO Mode for power saving and auto standby settings.
Displays current sound mode, input signal, format, sample rate, offset, and flag.
Instructions for checking and starting the firmware update process.
Setting a volume upper limit using 'Volume Limit' in the menu.
Solutions for when the unit's display shows nothing.
To Next Page
