Setting items Detailed items Description Page
.
Inputs
Input Assign Changes input connector assignment. 167
Source Rename Changes the display name for input source. 169
Hide Sources Removes from the display input sources that are not used. 169
Source Level Adjusts the playback level of the audio input. 169
Input Select Sets the audio input mode and decode mode. 170
.
Speakers
Audyssey
®
Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
171
Manual Setup
Sets up the speakers manually or changes the Audyssey
®
Setup settings.
181
.
Network
Information Displays network information. 189
Connection Selects whether to connect the home network to a wireless LAN or a wired LAN. 189
Settings Used for manually setting the IP address or when using a proxy server. 192
IP Control Enables network communication in standby power mode. 193
Friendly Name The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
194
Diagnostics Used to check the network connection. 194
Maintenance Mode Use when receiving maintenance from a Marantz service engineer or custom installer.
Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service
technician or custom installation professional.
195
Contents Connections Playback Settings Tips Appendix
138
Front panel Display Rear panel Remote Index
To Next Page
Loading...
