The Outlaws’ Guide to the Marantz SR5004
Marantz SR5004
5_
5 Digital Inputs and 1 Digital Output
Digital audio inputs and output include two coaxial inputs, two rear-panel optical
inputs, one front panel optical input, and one optical output. All four rear-panel
inputs are assignable.
7.1 Pre-Amp Outputs
7.1 pre-amplifier outputs allows the use of an outboard power amplifier, such as
Outlaw Audio’s Model 7125 or Model 7200.
7.1 Multichannel Analog Input
Multichannel input can be paired with any HDMI or component video input, or it
can be set to use the previous video source.
Multi-room Capability with Zone A/Zone B
Audio from any analog source can be routed to Zone A, and any digital source
can be routed to Zone B.
RS-232 port
The RS-232 port serves as control interface, allowing automation systems to
connect to and control the processor.
AM/FM, XM
®
-Ready, and SIRIUS Connect
™
In addition to AM and FM radio reception and 60 radio presets, the SR5004
includes provisions for both XM and SIRIUS
™
Satellite Radio. XM and SIRIUS
subscriptions and antenna modules are required (sold separately).
12V DC Trigger
Low-voltage DC trigger can be assigned to activate and deactivate depending on
the selected input and zone.
IR Input
IR distribution systems can be connected directly to the SR5004 using this input,
allowing for easy control of the unit even when it is located remotely or concealed
inside a closed cabinet.
To Next Page
Loading...
Need help?
General
