Marantz SR5014 User Manual

8
6) Turn on the receiver
• Press X to turn on the receiver.
7) Verify the connection
• Verify that you can see this screen on your TV.
AV Receiver Setup Assistant
Please select a language...
Deutsch
Français
English
Italiano
Español
Nederlands
Svenska
Pусский
Polski
If this screen is not displayed, please go back and retry
the steps again in the recommended sequence.
1. SR5014N_QSG_ENG_00A_190515.indd 8 2019/05/24 15:12:31
PrintingColor:Black

Marantz SR5014 Specifications

General

Channels	7.2
Power Output (8 ohms, 20 Hz - 20 kHz, 0.08% THD)	100W
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	140W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)	180W
70% Guarantee	Yes
HDMI Inputs	8
HDMI Outputs	2
HDMI 2.1 Support	No
HDR Support	HDR10, HLG, Dolby Vision
eARC Support	Yes
Auto Speaker Calibration	Audyssey MultEQ XT
Dolby Atmos	Yes
DTS:X	Yes
IMAX Enhanced	No
Wi-Fi	Yes
Bluetooth	Yes
AirPlay 2	Yes
HEOS Multi-room	Yes
Voice Control	Amazon Alexa, Google Assistant, Apple Siri
Phono Input	Yes
Zone Output	Zone 2
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Inputs	8 HDMI, 1 Phono
Outputs	2 HDMI, 1 Zone 2