SR5400
Design and specifications are subject
to change by Marantz without notice
www.marantz.com
Preliminary Specifications
FEATURES
MULTICHANNEL SURROUND
THX Certification -
THX Surround EX -
DTS ES(Matrix/Discrete), Neo:6, DTS96/24
Dolby Digital DD / DD-Ex
Dolby Pro Logic DPL / DPL II
Circle Surround 6.1
Virtual Surround •
Multi Channel Stereo •
Other Surround Modes -
Headphone Surround TruSurround Headphone
Auto Surround Mode Detection •
HDCD Decoder -
SOUND ENHANCEMENTS
Current Feedback Topology -
Discrete Amplification (All) •
Power Transformer EI
Linear Drive Power Supply -
Copper Plated Chassis -
D/A Conversion 192kHz/24bit All Channel
A/D Converter 192kHz / 24bit
Digital Signal Processing 32bit
Digital Signal Processor CS49400
Adaptive Double Differential Control -
Video Off •
High Grade Component Video Switching •
Source Direct •
System Blocks Shielding -
High Grade Audio Components •
Costomised Components -
Intelligent Silent Cooling system -
Chassis Stabilisation Bracing -
OTHERS
GYRO Touch Tuning -
Random Tuner Presets 50
RDS PS, PTY, RT
Speaker Distance Correction •
On Screen Display •
Auto TV Switching (On/Off) •
Software Upgradable (RS-232) -
IN/OUTPUTS
VIDEO
Scart In/Out -/-
Composite In/Out (incl monitor out) 5/3
S-Video In/Out (incl monitor out) 5/3
Component In/Out 2/1
Gold Plated In/Out (Cinch) -
AUDIO
Analogue In/out 8/4
Digital Optical In/Out 2/1
Digital Coaxial In/Out 2/1
Gold Plated In/out -
OTHER
Pre- Amplifier Out 6.1 channels
Main Amplifier In -
Multi-Channel In 6.1 channels
Speaker Terminal Heavy Duty Screw, 6 channels
Multi-Room Audio Out -
Multi-Room Video Out -
D.Bus In/Out •
Multi-Room D.Bus In/Out -
External IR In/Out -
IR Flasher In -
RS232C -
DC Triggers -
AC Outlets (Not for UK Model) 1 x Unswitched
Front Inputs Audio/Composite/S-Video
Headphone Out •
SPECIFICATIONS
AUDIO SECTION
Power Output 90W/ch (8 ohm)
Signal to Noise Ratio 105 dB
Freq. Response (Analogue In)10Hz - 100kHz (+/-
3dB)
Freq. Response (Dig In) 8Hz - 45 kHz (+/- 3dB)
Input Sensitivity/Impedance 168mV / 47kohm
TUNER SECTION FM
Frequency Range 87.5 - 108 MHz
Signal to Noise Ratio 75 / 70 dB (mono/stereo)
Distortion (Mono/Stereo) 0.2 / 0.3 %
Channel Selectivity 60 dB (+/-300kHz)
Usable Sensitivity IHF 1.8uV / 16.4 dBf
Channel Separation 45 dB (1kHz)
TUNER SECTION AM
Frequency Range 531-1602kHz (MW)
Signal to Noise Ratio 50 dB
Distortion 0.5% (400Hz 30% mod)
Channel Selectivity 60 dB (+/-18kHz)
GENERAL
Color Black / Silver
Metal Front Panel •
Remote Control RC5400SR
System Remote Function Pre-Coded
Power Consumption t.b.d.
Detachable Power Cable •
Maximum Dimensions (W x D x H)
440 x 160 x 463 mm
Weight t.b.d.
To Previous Page
