9.1ch:
0
Settings to assign all power amplifier
within this unit to MAIN ZONE to play
back up to 9.1-channels.
0
You can connect speakers for up to 11.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 9.1-
channels in accordance with the input
signal and sound mode.
7.1ch + ZONE2
(Default):
0
Setting to assign the power amplifiers in
this unit for ZONE2 to 2-channels.
0
You can connect speakers for up to 9.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
7.1ch (Bi-Amp):
0
Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0
You can connect speakers for up to 9.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
5.1ch (Bi-Amp) + ZONE2:
0
Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0
Setting to assign the power amplifiers in
this unit for ZONE2 to 2-channels.
7.1ch + Front B:
0
Setting to assign the power amplifiers
within this unit for connecting the second
set of front speakers.
0
You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 229)
0
You can connect speakers for up to 9.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
Contents Connections Playback Settings Tips Appendix
216
Front panel Display Rear panel Remote Index
To Next Page
Loading...
