To Next PageTo Next Page
Need help?Do you have a question about the Marantz SR6004 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Power Output | 110 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 2 |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 105 dB |
| Speaker Impedance | 6 - 8 ohms |
| Tuner Type | AM/FM |
| Dolby Technologies | Dolby TrueHD, Dolby Digital Plus, Dolby Pro Logic IIx |
| DTS Technologies | DTS-HD Master Audio, DTS Neo:6 |
| Outputs | Zone 2 |
| Analog Inputs | 6 (including Phono) |
Instructions for ordering replacement parts from Marantz, including required information.
Important safety precautions regarding electrical shock and fire hazards.
Technical details of the FM tuner, including frequency range and sensitivity.
Technical details of the AM tuner, including frequency range and sensitivity.
Power output and input specifications for audio channels.
Video input/output formats and frequency response.
HDMI input/output specifications and supported standards.
Power requirements, consumption, and weight of the unit.
List of included accessories provided with the unit.
Physical dimensions of the AV receiver.
Unit automatically determines input signal type for surround sound.
Bypasses tone controls and bass management for pure audio.
Reduces noise further by disabling video outputs and display.
Provides 6.1 channel surround for Dolby Digital EX and DTS-ES sources.
Explains Dolby Digital and the 5 modes of Pro Logic IIx.
Enhances height channel audio for immersive sound.
Explains DTS, DTS-ES, and Neo:6 decoding for multichannel audio.
Enables multichannel surround from non-encoded sources.
Bypasses all surround processing for pure stereo output.
Creates virtual surround sound from two speakers.
Enhances two-channel sources for wider soundstage.
Advanced surround technology for detailed soundstage.
Important notes and cautions for DTS, Dolby Digital EX, and PCM audio.
Details DTS Neural Surround for immersive audio experiences.
Explains dts Digital Surround for 5.1 channel discrete audio.
Details dts Neo:6 for matrix decoding and 6 channel expansion.
New multichannel format for 360-degree surround with 6.1 channels.
High-resolution audio format for 5.1 channels at 96kHz/24bits.
Lossless, studio-master quality audio for Blu-ray and HD-DVD.
High-definition audio delivered at high bit rates.
Low-bitrate encoding for 5.1 channels, used in HD DVD and Blu-ray.
Creates six output channels from 5.1 sources for enhanced surround.
Delivers immersive 7.1 channel experience from various sources.
Utilizes height channels for advanced 3D audio effects.
Creates virtual surround sound from two speakers.
Next-generation lossless technology for high-definition media.
Multichannel technology for 6.1 channel surround playback.
Sophisticated audio codec for future audio/video systems.
Patented process for delivering high-fidelity audio on CDs.
High-Definition Multimedia Interface standard.
Technology protecting copyrighted content.
Room equalization and volume management solutions.
Procedure for adjusting idling current for power amplifier channels.
Instructions for entering and navigating the service mode.
Procedure to reset unit settings to factory defaults.
Detects communication errors with EEP-ROM.
Detects +5V supply, DC on power amp, overheating, and overcurrent.
Detects overcurrents and +/-12V/Power Amp supply abnormalities.
Timing diagram for normal power-on sequence and signal checks.
Timing diagram illustrating error detection and response.
Symptoms and checks for power-related problems.
Troubleshooting standby LED blinking indicators.
Solutions for FL display segment or error message problems.
Details on using the extension cable kit for HDMI PWB servicing.
Step-by-step guide for connecting the HDMI PWB JIG.
Details on using the extension cable kit for INPUT PWB servicing.
Steps to save current settings to memory.
Steps to restore saved settings from memory.
Procedures for clearing backup memory for service.
Procedure for updating MAIN CPU firmware.
Procedure for updating DSP firmware.
Procedure for updating HDMI CPU firmware.
Procedure for updating USB CPU firmware.
List of required hardware and software for updates.
Steps to update DSP firmware.
Steps to update HDMI CPU firmware.
Steps to update USB CPU firmware.
