0
When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch (Bi-Amp)” or “7.1ch +
Front B” in the menu, the assigned channels are output from HEIGHT2
speaker terminals.
0
When Assign Mode is set to “5.1ch (Bi-Amp) + ZONE2” in the menu, the front
channels for Bi-Amp connection are output from HEIGHT1 speaker terminals,
and the ZONE2 channels are output from HEIGHT2 speaker terminals.
o
Floor
n
Layout
Select the floor speakers location.
5ch & SB
(Default)：
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
o
Height
n
Height Sp
Select the number of the height speakers and ceiling speakers used in
MAIN ZONE.
None： Uses no height and ceiling speakers.
2ch
(Default)：
Uses a set of (two) height speakers or
ceiling speakers.
4ch：
Uses two sets of (four) height speakers or
ceiling speakers.
n
Dolby Sp
Select the number of the Dolby Atmos Enabled speakers used in MAIN
ZONE.
None
(Default)：
Uses no Dolby Atmos Enabled speakers.
2ch：
Uses a set of (two) Dolby Atmos Enabled
speakers.
4ch：
Uses two sets of (four) Dolby Atmos
Enabled speakers.
Contents Connections Playback Settings Tips Appendix
217
Front panel Display Rear panel Remote Index
To Next Page
Loading...
