Marantz SR6012 - Playback in ZONE2

Playback in ZONE2
.
MUTE
ZONE2
POWER
VOLUME
df
X
:
Input source
select
buttons
1
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
2
Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights.
0
Power in ZONE2 can be turned on or off by pressing ZONE2
ON/OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
0
You can also select ZONE2 as the input source by pressing
ZONE2 SOURCE and then turning the INPUT SELECTOR.
Contents
Connections Playback Settings Tips Appendix
153
Front panel Display Rear panel Remote Index