EasyManuals Logo

Marantz SR7001 Specification Sheet

Marantz SR7001
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The SR7001 features THX Select2 certification and 110 watts of continuous power per channel (yes, 110 watts from each of its seven
current-feedback amplifiers!). You can connect up to four HDMI equipped sources to the SR7001. The SR7001 comes complete with format
conversion which lets you watch older videos through the super-convenient HDMI format, and there’s also a Second Zone audio/video
output. You’ll also find Dolby Virtual Speaker so you can enjoy an immersive surround experience with the dialog clarity inherent in a
discrete center channel configuration with just two speakers. The SR7001 features Audyssey’s remarkable Auto Calibration that examines
your entire room to corrects for the acoustical problems that sometimes make those other seats (and you know which ones we mean, don’t
you?) just as rewarding as the ones directly in front of your display device’s screen. The SR7001 has an infrared input and two DC trigger
outputs so you can coordinate your entire system for convenient remote operation. We’ve housed the SR7001 in a new, compact chassis,
( less than 16”) that will fit more easily into even the tightest spaces. The SR7001 also comes with our industry leading three year warranty.
• 110 watts (into 8 ohms) x 7 ch Amps
• THX Select2 certification
• All discrete “Current Feedback” amplifier stages
• HDMI (V1.2) Repeating: 4-In / 1-Out
• 32bit DSP
• XM Ready with discrete IR commands
• Dolby Digital EX, Pro Logic IIx (Movie/Music/Game),
• DTS 96/24, ES (Discrete 6.1/Matrix6.1), Neo:6 (Cinema/Music)
• SRS Circle surround II
• Audyssey Auto Calibration
• Up-Conversion (w/TBC) to HDMI with 480I/480P converter
• Dual Component Video outputs
• 192 kHz/24-bit D/A converters for all channels
• HDCD® Decoder
• Dielectric Protected Binding Posts
• Speaker A/B switching
• 2nd Zone A/V output (Individual source) w/discrete commands
• Dolby Headphone
• Lip sync. control
• Assignable HD compatible component video
switching (4 in / 2 out)
• RS-232C terminal for system control
• Direct IR Flasher Input
• x2 DC Trigger outputs
• D-BUS (RC-5 In/Out) remote connection
• Front panel A/V/Optical inputs
• Learning/pre-programmed backlit remote with LCD
• 1 switched and 1 un-switched AC convenience outlets
• New shallow chassis < 16”
• Three year limited warranty
SR7001
THX SELECT2 SURROUND SOUND A/V RECEIVER
2
Life Amplified
TM
Compatible
®
2

Other manuals for Marantz SR7001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR7001 and is the answer not in the manual?

Marantz SR7001 Specifications

General IconGeneral
Channels7.1
HDMI Inputs2
HDMI Outputs1
Dolby DigitalYes
DTSYes
Component Video Inputs3
Component Video Outputs1
Preamp Outputs7.1
Zone 2 Audio OutputYes
Frequency Response10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion0.08%
Input Sensitivity200 mV
Signal-to-Noise Ratio105 dB
Power Consumption650W
Digital Audio Inputs4 (2 optical, 2 coaxial)
Analog Audio Inputs7
Surround Sound FormatsDolby Digital, Dolby Digital EX, DTS
Weight33 lbs
Standby Power ConsumptionLess than 1W

Related product manuals