Need help?Do you have a question about the Marantz SR7000 and is the answer not in the manual?
General| Number of Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Output Impedance | 8 ohms |
| Power Output | 100 watts per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
| Inputs | 7 Analog Audio, 5 Composite Video |
| Input Impedance | 47 kOhms |
| Digital inputs | 2 Coaxial, 1 Optical |
| Video inputs | 5 Composite |
| Damping Factor | 100 |
Controls power status and indicates operation modes.
Connects headphones and adjusts overall sound level.
Selects input sources and surround sound modes.
Configures system settings and stores tuner presets.
Manages tuner functions and display settings.
Shows signal status and provides auxiliary input connections.
Emphasizes reading and following all safety and operating guidelines.
Advises on safe cleaning, accessory use, and avoiding water/moisture.
Covers proper ventilation, power source, and electrical grounding.
Details power cord safety, lightning surge protection, and preventing overloads.
Thanks user and suggests consulting dealer for setup.
Explains DTS and Dolby Digital surround sound capabilities.
Highlights surround modes, high-res decoding, and amplifier power.
Lists digital inputs, outputs, and pre-amp connections.
Covers tuner, on-screen display, and multi-room capabilities.
Details connections for FM and AM antennas.
Explains connections for audio and video sources/recorders.
Covers S-Video connections and digital audio inputs/outputs.
Describes connections for multi-room systems and remote control.
Details DC trigger outputs and subwoofer amplifier connection.
Explains connecting units for system remote control operation.
Guides on connecting a subwoofer speaker and powered subwoofer.
Details the remote's ability to learn codes and its preset functions.
Describes the remote's illuminated buttons and LCD screen.
Explains Jog Dial operation, macro programming, and custom naming.
Identifies key control buttons on the remote.
Highlights source selection, display, and navigation controls.
Details usage of command entry, function selection, volume, and navigation buttons.
Covers tuner channel control, mute, guide, clear, memo, and keypad functions.
Explains indicators and how to switch between remote modes.
Describes standard operation and control of various components.
Guides on how to program the remote to learn new codes.
Step-by-step process for learning remote control commands.
Customizing names for remote control functions.
Procedure for deleting learned codes and resetting buttons.
Details how to input characters for custom function names.
Methods for clearing specific buttons or entire functions.
Steps to reset all learned codes and names to factory defaults.
Guide to creating sequences of commands for a single button.
Instructions for modifying existing macro sequences.
Details on programming macros and executing them.
How to trigger and run programmed macro sequences.
Demonstrates programming a complex command sequence.
Steps to remove saved macro programs.
Explains how to recharge the remote's luminous buttons.
Configures the remote for USA or REST component codes.
Sets the delay time between macro command transmissions.
Lists Jog Dial commands for various source types.
Lists Jog Dial commands for CD-R, TV, CD, and LD sources.
Lists Jog Dial commands for Tape and MD sources.
Describes AUTO and STEREO surround sound processing.
Details Dolby Digital and DTS surround sound modes.
Explains various cinema and multi-channel surround effects.
Covers direct signal path and 6-channel input surround modes.
Provides warnings and precautions for DTS and high-sampling rate PCM signals.
Shows how input signals are processed in AUTO and STEREO modes.
Details signal mapping for Dolby and DTS surround modes.
Illustrates signal processing for cinema and multi-channel modes.
Explains signal behavior in direct path and 6-channel input modes.
Addresses issues with powering on and sound/picture output.
Solves problems related to speaker sound and signal input.
Troubleshoots noise, signal reception, and remote control problems.
Deals with lost preset data and error message resolution.
Lists detailed specifications for FM and AM tuners.
Provides technical details for audio output and video processing.
Covers power, dimensions, weight, and included accessories.
To Next Page
