What does “ANTENNA” displayed on my Marantz SR7001 mean?
If “ANTENNA” is displayed on your Marantz Stereo Receiver, it indicates that the XM terminal and the XM Connect-and-Play antenna or Passport system might not be properly connected. Check the connections to ensure they are correct.
Why is there no speaker output from my Marantz SR7001?
If you're not getting any sound from your speakers, make sure headphones are not connected to the headphone jack, as this will disable speaker output.
Why is there no audio output from the center channel speaker on my Marantz SR7001 Stereo Receiver?
If you aren't getting any audio from the center channel speaker on your Marantz Stereo Receiver, check these: * Ensure the center speaker cable is correctly connected. * If 'STEREO' is selected for Surround mode, no sound will come from the center speaker; choose another Surround mode. * Verify that 'Center = NONE' hasn't been selected in SETUP mode; correct the setting if needed.
Why is there no audio output from the surround speakers on my Marantz SR7001?
If there's no audio from the surround speakers on your Marantz Stereo Receiver, check the following: * Ensure the surround speaker cables are correctly connected. * If 'STEREO' is selected for Surround mode, no sound will be output from the surround speakers; select a different Surround mode. * Confirm that 'Surround = NONE' hasn't been selected in SETUP mode; adjust the setting as needed.
Why is there no audio output from the surround back speakers on my Marantz SR7001?
If you're not hearing audio from the surround back speakers on your Marantz Stereo Receiver, consider these points: * Make sure the surround back speaker cables are properly connected. * The surround mode must be set to EX/ES to enable the surround back speakers. * Ensure that 'Surround back = NONE' hasn't been selected in SPEAKERS SIZE SETUP; correct the setting if necessary.
Why is there no output to Subwoofer Out on my Marantz SR7001?
If there's no output to the Subwoofer Out on your Marantz Stereo Receiver, check if 'Subwoofer = NONE' has been selected in SETUP mode. If so, select 'Subwoofer = YES'.
Why can I not select Neo:6 mode on my Marantz SR7001 Stereo Receiver?
If you're unable to select Neo:6 mode on your Marantz Stereo Receiver, it's because the input signal is incompatible. Use a 2 channel Dolby Digital input signal, PCM input signal, or analog input signal.
Why FM or AM reception fails on Marantz Stereo Receiver?
If FM or AM reception is failing on your Marantz Stereo Receiver, ensure the indoor FM and AM antennas are correctly connected to the FM and AM antenna outlets.
How to fix incorrect Audio or Video for selected source on Marantz SR7001?
If you're getting incorrect audio or video for the selected source on your Marantz Stereo Receiver, ensure the input cable is correctly connected by referring to the connection diagram.
What to do if I hear noise during FM reception on my Marantz SR7001?
If you're getting noise during FM reception with your Marantz Stereo Receiver, it could be due to weak radio waves. Try installing an FM outdoor antenna to improve reception.
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Preamp Outputs | 7.1 |
| Zone 2 Audio Output | Yes |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 105 dB |
| Power Consumption | 650W |
| Digital Audio Inputs | 4 (2 optical, 2 coaxial) |
| Analog Audio Inputs | 7 |
| Surround Sound Formats | Dolby Digital, Dolby Digital EX, DTS |
| Weight | 33 lbs |
| Standby Power Consumption | Less than 1W |
Essential steps to follow for safe operation and reference, including reading instructions and heeding warnings.
Warnings against hazards, unauthorized servicing, and proper component handling.
Highlights of advanced audio decoding, power, connectivity, and system integration.
Detailed descriptions of each button and knob on the SR7001's front panel.
Explanation of the various indicators shown on the front panel's FL display.
Descriptions of various audio, video, and digital connection terminals.
Details on multiroom, monitor outputs, RS-232C, XM, and remote control ports.
Specifications and connection guidance for speaker terminals and AC outlets.
Detailed mapping of remote control buttons to SR7001 functions.
Guidelines for optimal remote range and proper battery installation.
Recommendations for ideal speaker placement and aligning speaker unit heights.
Step-by-step instructions for securely connecting speakers and speaker wire.
Instructions for connecting powered and passive subwoofers.
Procedures for connecting CD recorders, MD decks, and tape decks.
Guidance on connecting digital sources using coaxial and optical inputs/outputs.
Details on SR7001's HDMI ports and connecting HDMI devices.
Explanation of video connection types like Video, S-Video, and Component.
Explanation of different video connection types and their usage.
Procedures for connecting 7.1 channel audio sources like SACD and DVD-Audio players.
Instructions for connecting external amplifiers and remote control interfaces.
Procedures for setting up audio output for multiple rooms.
Overview of the OSD menu system for SR7001 setup and operation.
How to navigate setup menus using the remote and front panel controls.
Assigning digital and analog inputs to specific sources.
Adjusting speaker levels for 7.1 channel input sources.
Overview of the automatic speaker setup process using MultEQ technology.
Instructions for manually configuring speaker settings.
Step-by-step guide for conducting speaker and room measurements.
Reviewing measurement results and saving speaker configuration.
Procedures for checking speaker detection and performing calibration.
Setting speaker sizes and configuring surround/back speakers.
Setting individual speaker channel levels for balanced output.
Adjusting individual channel levels and parameters for surround modes.
How to choose and switch between input sources and surround modes.
Instructions for controlling volume, bass, treble, Night Mode, and Dialogue Normalization.
Explanation of Auto, THX, Dolby, DTS, and other surround modes.
Basic steps for tuning FM, AM, and XM radio stations.
Procedures for automatic/manual tuning and direct station access.
Automatically scanning and storing FM/AM stations into memory.
Manually storing stations and recalling them from memory.
Operating Marantz DVD, CD Player, and VCR using the remote.
Learning and storing codes from other remotes, and renaming buttons.
Creating sequences of operations for a single button press and running them.
Guide to resolving common operational problems by symptom.
Detailed technical specifications for the FM and AM tuners.
To Next Page
