How to fix incorrect audio from a channel on Marantz Stereo Receiver?
If you're getting incorrect audio from a channel on your Marantz Stereo Receiver, it's possible the speaker cable is connected incorrectly. Refer to the connection diagram to ensure the cable is properly connected.
How to fix FM or AM reception failure on Marantz Stereo Receiver?
If you're experiencing FM or AM reception issues with your Marantz Stereo Receiver, ensure that the indoor FM and AM antennas are correctly connected to the FM and AM antenna outlets.
Why is there no speaker output from my Marantz Stereo Receiver?
If there's no speaker output from your Marantz Stereo Receiver, check if headphones are connected to the headphone jack. Disconnecting the headphones should restore sound to the speakers, as they will not output sound when headphones are connected.
Why is a specific channel not producing output on my Marantz Stereo Receiver?
If a specific channel isn't producing output on your Marantz Stereo Receiver, there could be a couple of reasons. First, check the encoded channel on the source side to ensure there's content recorded there. Also, make sure the input cable is correctly connected by referring to the connection diagram.
What to do if there is no output to Sub Woofer Out on Marantz Stereo Receiver?
If there's no output to the Sub Woofer Out on your Marantz Stereo Receiver, check the SETUP mode to see if 'Sub-woofer = NONE' has been selected. If so, change the setting to 'Sub-woofer = YES'.
Why is there no audio output from the center channel speaker on my Marantz Stereo Receiver?
If you're not getting any audio output from the center channel speaker on your Marantz Stereo Receiver, the center speaker cable connection might be incomplete. Ensure the cable is connected correctly.
Why can't I select EX/ES mode on my Marantz Stereo Receiver?
If you're unable to select EX/ES mode on your Marantz Stereo Receiver, it could be due to one of two reasons: either 'Surround center= NONE' has been selected in SPEAKERS SIZE SETUP (in which case, make the correct setting), or the input signal is incompatible (use a 5.1channel source).
Why can't I select Pro Logic IIx mode on my Marantz Stereo Receiver?
If you're unable to select Pro Logic IIx mode on your Marantz Stereo Receiver, the input signal may be incompatible. Use a 2 channel Dolby Digital input signal, PCM input signal, or analog input signal.
How to troubleshoot incorrect audio or video for selected source on Marantz Stereo Receiver?
If you're experiencing incorrect audio or video for the selected source on your Marantz Stereo Receiver, the input cable may be connected incorrectly. Refer to the connection diagram to ensure the cable is connected correctly.
Why is there no sound from the surround speaker when STEREO has been selected for Surround mode on Marantz Stereo Receiver?
When STEREO has been selected for Surround mode, no sound will be output from the surround speaker. Set another Surround mode.
General| Number of Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Weight | 10.5 kg |
| Speaker load impedance | 6 - 8 ohms |
| Input Impedance | 47k ohms |
| Power Output | 75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Frequency Response | 10Hz-100kHz (+1/-3dB) |
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | 105 dB |
| Tuning range | FM |
| Digital inputs | Coaxial, Optical |
| Video Connections | Component, Composite, S-Video |
| Damping Factor | 100 |
Explains DTS technologies like DTS, DTS-ES, Neo:6, and DTS 96/24 for advanced audio.
Covers Dolby Digital, Dolby Pro Logic IIx, and Circle Surround II for immersive sound.
Lists advanced digital decoding, amplification, and processing capabilities.
Lists remote control, batteries, antennas, and user guide.
Controls for power, input selection, volume, mute, and display.
Buttons for selecting surround modes, pure direct, and HT-EQ.
Buttons for accessing setup menus, tuner operations, and system navigation.
Details on various indicators like DISP, SLEEP, AUTO SURR, TUNER, PEAK, DIGITAL, ANALOG.
Describes the main display for status, input, surround mode, and volume.
Details analog audio I/O, FM/AM antenna terminals, and ground terminals.
Covers video inputs/outputs, digital audio inputs, and component video connections.
Explains remote control jacks, 7.1 channel input, speaker outputs, and subwoofer output.
Basic usage of the remote for controlling functions in AMP/TUNER modes.
Details the function of each remote control button.
Methods to program remote using codes or scanning, and how to check codes.
How to reset all programmed codes to factory defaults.
Information on effective remote range and battery loading instructions.
Details the remote's functions when set to control the SR3001 amplifier or tuner.
Recommended placement of front, surround, and subwoofer speakers for optimal sound.
Illustrates how to connect speaker wires to the SR3001 terminals.
Instructions for connecting CD players, tape decks, and other audio sources.
Guidance on connecting digital sources like CD, DVD players via coaxial or optical inputs.
Explains VIDEO, S-VIDEO, and Component connections and their usage.
How to connect SACD or DVD Audio players for multichannel playback.
Using remote control terminals for controlling multiple Marantz products.
Guidance on connecting supplied antennas and installing outdoor ones.
Assigns inputs and sets speaker size, distance, and level for optimal acoustics.
Adjusts preference settings, surround modes, and LFE levels.
Sets parameters for Dolby Pro Logic II Music mode.
Assigns digital input jacks to specific input sources.
Provides guidance on speaker placement relative to room size.
Sets speaker size (Large/Small) for each channel.
Sets speaker distance for calculating delay times.
Adjusts individual speaker volume levels using test tones for balanced output.
Visual representation of the speaker distance setup menu.
Adjusts speaker volume levels using test tones for balanced output.
Adjusts speaker volume levels manually without using test tones.
Controls bass signal routing and standby power consumption.
Activates HT-EQ for movies and sets LFE signal output level.
Controls for C WIDTH, PANORAMA, and DIMENSION.
Controls for TRUBASS and SRS DIALOG for enhanced bass and clarity.
Choosing input sources and adjusting the main volume.
Selecting surround modes and adjusting tone controls (bass/treble).
Using mute, sleep timer, and night mode for enhanced user experience.
Covers AUTO, Dolby Digital, Pro Logic IIx, DTS, DTS-ES, Neo:6 modes.
Explains MULTI CH. ST, CIRCLE SURROUND II, and Virtual modes.
Important cautions for DTS, Dolby Digital EX, 96kHz PCM, and HDCD signals.
Adjusts analog input signal and selects between analog/digital audio inputs.
Guidelines for headphone use, display settings, and video output control.
Instructions for recording audio and video signals.
Activates HT-EQ and connects multichannel sources like SACD or DVD Audio players.
Overview of the 7.1 channel input level adjustment menu.
Covers manual tuning, auto tuning, and direct frequency call.
Storing and recalling favorite stations using preset memory.
Scanning through presets and recalling specific stations.
Rearranging, naming, and deleting stored radio stations.
Instructions for multi-room audio playback.
Important notes regarding the Surround Speaker B function's availability.
Guides users through diagnosing and resolving operational issues.
To Next Page
