Need help?Do you have a question about the Marantz SR5200 and is the answer not in the manual?
General| Surround Sound | Dolby Digital, DTS, Dolby Pro Logic II |
|---|---|
| Channels | 6.1 |
| Signal to Noise Ratio | 98 dB |
| Input Sensitivity | 200mV (line) |
| Input Impedance | 47k ohms |
| Total Harmonic Distortion | 0.08% |
| Speaker Impedance | 6-16 ohms |
| Remote Control | Yes |
| Digital Inputs | 2 optical, 1 coaxial |
| Video Inputs/Outputs | Composite |
| Tuner Section | AM/FM |
| Dimensions | 440 x 161 x 474 mm |
| Weight | 12.5 kg |
| Frequency Response | 10Hz - 100kHz (+/- 3 dB) |
Siting, environmental, and wiring safety guidelines.
Selects inputs, surround modes, and tunes radio.
Setting codes for specific appliances.
Alternative code selection and checking.
Overview of the OSD menu system.
Configuring surround modes and speaker settings.
Navigating menus and assigning digital inputs.
Setting speaker types (Large/Small).
Setting speaker placement delay and volume levels.
Explains common surround modes.
Addresses power, sound, and connection issues.
Addresses noise, DTS, PCM, Dolby, and reception problems.
Addresses remote commander failures and preset issues.
Codes for various audio, media, satellite, TV, and VCR devices.
To Next Page
