13
ENGLISH
SURROUND MODE
SOURCE DIRECT : Switch the source direct ON or OFF with or
button. This bypasses the surround processing
and crossover for the main speakers (front left
and right will be full range and the subwoofer will
be ON)
Note: Surround mode cannot be changed in
Source Direct mode.
SURR-MODE : Select the surround mode with
or button.
NIGHT MODE : Switch the NIGHT MODE ON or OFF with
or
button.
Selecting the Night Mode ON is effective in Dolby
Digital only, and it compresses the dynamic
range.
This softens loud passages such as sudden
explosions, to help prevent disturbing others late
at night.
LFE LEVEL : Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0dB, -10 dB or OFF with
or button.
The level is ordinarily set to 0 dB. When use DTS
music source, LFE level is set to -10 dB.
CHANNEL LEVEL CONTROL
Desired channels can be selected by pressing or button.
Each channel level will be adjusted by pressing
or button.
Only the usable channels which are determined depending on the
SURROUND mode, and SPEAKER SETTING are displayed.
To Next Page
Loading...
