To Next PageTo Next Page
Need help?Do you have a question about the Marantz SR5015 DAB and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Power Output | 100W (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| HEOS Multi-room | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| DAB+ Tuner | Yes |
| Number of Power Amps | 7 |
| HDR Support | HDR10, HDR10+, Dolby Vision, HLG |
| eARC Support | Yes |
| Auto Speaker Calibration | Audyssey MultEQ XT |
| IMAX Enhanced | No |
| AirPlay 2 | Yes |
| Phono Input | Yes |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 98 dB |
| Ethernet Port | Yes |
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) | 140W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) | 180W |
| HDMI 2.1 Support | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08% (20 Hz - 20 kHz) |
| USB Port | 1 |
| Dimensions | 440 x 160 x 348 mm (W x H x D) |
Essential initial reading instructions for safe and proper operation.
Details required and optional equipment for setup.
Step-by-step guide for attaching antennas for Bluetooth/Wi-Fi.
Guide to inserting batteries into the remote control unit.
Instructions for connecting receiver to TV, power, and home network.
Walkthrough for configuring speakers and components via TV.
Instructions for downloading HEOS and Marantz AVR remote apps.
