To Next PageTo Next Page
Need help?Do you have a question about the Marantz SR5008/U1B and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| HDMI Outputs | 2 |
| Response Bandwidth | 10 Hz - 100 kHz |
| Tuner Type | AM/FM |
| HDMI Switching | Yes |
| 3D Technology | Yes |
| Damping Factor | 100 |
| Power Consumption | 600 W |
| Standby Power Consumption | 0.2 W |
| Power Output | 100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) |
| Frequency Response | 10 Hz - 100 kHz (+1 dB, -3 dB) |
| Input Impedance | 47 kOhms |
| Tuner Bands | FM, AM |
| Output Impedance | 4 - 16 ohms |
Key instructions for safe servicing and handling of the unit and its parts.
Highlights critical safety parts and the importance of using designated replacements.
Details on power output, input sensitivity, frequency response, and S/N.
Procedure to initialize the receiver after component replacement.
Section covering audio-related adjustments.
Diagnostic steps for power-related problems, including no power and fuse checks.
Detailed flow for troubleshooting a blown fuse and related components.
Troubleshooting guide for HDMI/DVI connection issues with no video or audio output.
