Marantz SR5008/U1B - Μcom;Dsp Version Display Mode

1. µcom/DSP Version display mode
1.1. Operation specications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "ON/STANDBY
(
X
)
" button to turn on the power while pressing the "DISPLAY" and "STATUS" buttons.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
b
When the version is displayed on the FL Display, the version list is also displayed on the GUI.
1.2. Display Order
Error information(Refer to 1.3. Error display)→
q
Modeldestinationinformation→
w
Firmware Package Version
→
e
Mainμ-com/FBL(1stBootLoader)Version→
r
DSPROMVersion→
t
Audio PLD Version
→
y
GUISFLASHVersion→
u
Ethernet(DM860A) 1st Boot Loader, Hardware ID
→
i
Ethernet(DM860A)2ndBootLoader,RhapsodyFlag→
o
Ethernet(DM860A) IMAGE
→
Q0
Ethernet(DM860A)MAC ADDRESS information
q
Model destination information :
SR5008 U model
FLD
S R 5 0 0 8 U
S N - * * * *
* * * * * *
SR5008 N model
FLD
S R 5 0 0 8 N
S N - * * * *
* * * * * *
SR5008 K model
FLD
S R 5 0 0 8 K
S N - * * * *
* * * * * *
w
Firmware Package Version :
FLD
P A C K A G E
0 0 0 0
e
Main µ-com / FBL(1st Boot Loader) Version :
FLD
M A I N
* * * * * * * *
B L - * * . * *
r
DSP ROM Version :
FLD
D S P
* * . * *
t
Audio PLD Version :
FLD
A . P L D
* * . * *
y
GUI S-FLASH Version :
SR5008 U model
FLD
G U I
2 0 2 1 * * * *
SR5008 N model
FLD
G U I
2 0 2 1 * * * *
SR5008 K model
FLD
G U I
2 0 2 5 * * * *
u
Ethernet(DM860A) 1st Boot Loader, Hardware ID :
FLD
N E T F B L
* * * * * *
- A A
i
Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag :
FLD
N E T S B L
* * * * * * * *
* * * * * - 0 A
o
Ethernet(DM860A) IMAGE :
FLD
N E T I M G
* * * * * * * *
* * * * *
Q0
Ethernet(DM860A) MAC ADDRESS information :
FLD
N E T M A C
* * * * * *
- * * * * * *
24
www.audiodna.sk