Why does my Marantz Stereo Receiver receiving only XM channels 0 and 1?
If you are only receiving XM channels 0 and 1, it indicates that the XM Tuner is not activated. Contact XM Radio to resolve this issue.
What to do if my Marantz Stereo Receiver has no speaker output?
If there's no sound coming from the speakers, make sure headphones are not connected to the headphone jack. When headphones are plugged in, the speakers will not produce sound. Disconnect the headphones to restore speaker output.
Why is there no audio output from the center channel speaker on my Marantz SR7002 Stereo Receiver?
If there is no audio from the center channel speaker, check these items: 1. Ensure the center speaker cable is correctly connected. 2. If 'STEREO' is selected for Surround mode, no sound will come from the center speaker; select a different Surround mode. 3. Verify that 'Center = NONE' is not selected in the SETUP mode; correct the setting if needed.
Why is there no audio output from the surround speakers on my Marantz SR7002?
If you're not getting any sound from the surround speakers, here’s what to check: 1. Make sure the surround speaker cables are properly connected. 2. If the Surround mode is set to 'STEREO,' the surround speakers won't output sound. Choose another Surround mode. 3. Confirm that 'Surround = NONE' is not selected in the SETUP mode and adjust the setting if necessary.
Why is there no audio output from the surround back speakers on my Marantz SR7002?
If there's no audio from the surround back speakers, check the following: 1. Ensure the surround back speaker cables are correctly connected. 2. Verify that the Surround mode is set to EX/ES mode. 3. Confirm that 'Surround back = NONE' is not selected in the SPEAKERS SIZE SETUP; correct the setting if needed.
What does it mean when “NO SIGNAL” is displayed on my Marantz SR7002?
If “NO SIGNAL” is displayed, it means the signal cannot be received. Try repositioning your XM Mini-Tuner and Home Dock.
What to do if Marantz Stereo Receiver doesn't output to Subwoofer Out?
If there's no output to the Subwoofer Out, check if 'Subwoofer = NONE' has been selected in SETUP mode. If it has, select 'Subwoofer = YES'.
What does it mean when “ANTENNA” is displayed on my Marantz SR7002 Stereo Receiver?
If “ANTENNA” is displayed, the XM terminal and the XM Mini-Tuner and Home Dock may not be properly connected. Check to ensure the connections are correct.
What to do if my Marantz Stereo Receiver has noise during AM reception?
If you hear noise during AM reception, it could be due to interference from other electrical fields. Try changing the location where the AM indoor antenna is set up.
Why does my Marantz SR7002 Stereo Receiver have incorrect audio or video for selected source?
If the audio or video is incorrect for the selected source, the input cable might be connected incorrectly. Refer to the connection diagram and connect the cable correctly.
List of accessories included in the package for verification before use.
Overview of the unit's advanced features and technologies incorporated.
Identification and explanation of the unit's front panel controls and indicators.
Detailed explanation of the remote control's buttons and their functions.
Instructions on how to check the current time displayed on the remote controller.
Overview of RC8001SR operations for AMP and TUNER modes.
Guide for connecting CD recorders and tape decks to the audio inputs/outputs.
Instructions for connecting a powered or passive subwoofer.
Guide to using the OSD menu system with remote or front panel controls.
Assigning digital inputs and HDMI/Component to input sources.
Adjusting speaker levels for 7.1 channel input sources.
Renaming input sources with custom names up to 10 characters.
Automatic speaker and room characteristic measurement for optimization.
Step-by-step guide for performing the automatic speaker setup process.
Adjusting individual speaker channel levels for optimal listening.
Fine-tuning sound field parameters for Pro Logic IIx music mode.
Setting up video signal conversion for monitor output.
Selecting the output terminal for HDMI signals.
Automatic synchronization of audio and video signals via HDMI.
Configuring settings for the multi-room audio system.
Setting up DC trigger control jacks for main/multi-room linkage.
Selecting equalizer modes: PRESET, AUDYSSEY, FRONT, FLAT, or OFF.
Guide to selecting the desired input source for listening.
Instructions for selecting surround modes like AUTO, NIGHT, or specific modes.
Adjusting the unit for night listening to compress dynamic range.
Guide to tuning and listening to FM/AM radio stations.
Instructions for automatically scanning and tuning radio stations.
Mode for HD Radio reception, switching between analog and digital signals.
Automatically scans and stores FM/AM stations into memory.
Manually tuning and storing desired stations into memory.
Procedure to remove preset stations from memory.
Rearranging stored preset stations sequentially.
Overview of HD Radio's improved sound quality and data services.
Selecting signal type for HD Radio stations.
Displaying station name, artist, song title, and signal status.
Evaluating signal strength for HD Radio reception.
Connecting speakers in another room for music listening.
Troubleshooting HDMI connection and audio/video issues.
Troubleshooting XM satellite radio reception and connection.
How to lock/unlock front panel buttons for child safety or accidental changes.
Setup codes for controlling Marantz amplifiers.
Setup codes for controlling Marantz receivers and tuners.
List of accessories included in the package for verification before use.
Overview of the unit's advanced features and technologies incorporated.
Identification and explanation of the unit's front panel controls and indicators.
Detailed explanation of the remote control's buttons and their functions.
Instructions on how to check the current time displayed on the remote controller.
Overview of RC8001SR operations for AMP and TUNER modes.
Guide for connecting CD recorders and tape decks to the audio inputs/outputs.
Instructions for connecting a powered or passive subwoofer.
Guide to using the OSD menu system with remote or front panel controls.
Assigning digital inputs and HDMI/Component to input sources.
Adjusting speaker levels for 7.1 channel input sources.
Renaming input sources with custom names up to 10 characters.
Automatic speaker and room characteristic measurement for optimization.
Step-by-step guide for performing the automatic speaker setup process.
Adjusting individual speaker channel levels for optimal listening.
Fine-tuning sound field parameters for Pro Logic IIx music mode.
Setting up video signal conversion for monitor output.
Selecting the output terminal for HDMI signals.
Automatic synchronization of audio and video signals via HDMI.
Configuring settings for the multi-room audio system.
Setting up DC trigger control jacks for main/multi-room linkage.
Selecting equalizer modes: PRESET, AUDYSSEY, FRONT, FLAT, or OFF.
Guide to selecting the desired input source for listening.
Instructions for selecting surround modes like AUTO, NIGHT, or specific modes.
Adjusting the unit for night listening to compress dynamic range.
Guide to tuning and listening to FM/AM radio stations.
Instructions for automatically scanning and tuning radio stations.
Mode for HD Radio reception, switching between analog and digital signals.
Automatically scans and stores FM/AM stations into memory.
Manually tuning and storing desired stations into memory.
Procedure to remove preset stations from memory.
Rearranging stored preset stations sequentially.
Overview of HD Radio's improved sound quality and data services.
Selecting signal type for HD Radio stations.
Displaying station name, artist, song title, and signal status.
Evaluating signal strength for HD Radio reception.
Connecting speakers in another room for music listening.
Troubleshooting HDMI connection and audio/video issues.
Troubleshooting XM satellite radio reception and connection.
How to lock/unlock front panel buttons for child safety or accidental changes.
Setup codes for controlling Marantz amplifiers.
Setup codes for controlling Marantz receivers and tuners.
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 105 dB |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 3 |
| Digital Audio Inputs (Coaxial) | 2 |
| Ethernet Port | No |
| USB Port | No |
| Surround Sound Formats | Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio |
| Audio Decoders | Dolby Digital, DTS |
| Video Upconversion | Yes |
| Power Output | 110 watts per channel into 8 ohms (20 Hz - 20 kHz) at 0.08% THD |
To Next Page
