Marantz SR7500/A1B - Page 16

14
9. If the connection is made successfully, a dialog box say-
ing “Success to connect” appears and “CONNECTED” is
displayed on FLD.
10. Click Send the DSP codes button on the dialog box.
Progress status of updating will be shown on PC and
LOADING is displayed on FLD.
11. If updating is completed successfully, “COMPLETED” is
displayed on FLD. And a dialog box saying “Finished the
DSP code transmitting” appears.
12. Click OK and then Application is closed automatically.
13. Turn off the unit.
8. Set the Baud rate to 38400 then click Start communi-
cation button.
8. Baud rate Ǜ 38400 ƴᚨܭƠŴStart communication Ǜǯ
ȪȃǯƠLJƢŵ
9. ᡫዓƴ঺ыƢǔƱɦᚡƷȀǤǢȭǰȜȃǯǹƕᘙᅆƞ
ǕŴ
FL ȇǣǹȗȬǤƴƸ "CONNECTED" ƕᘙᅆƞǕLJƢŵ
10. Send the DSP codes ǛǯȪȃǯƠLJƢŵǢȃȗȇȸ
ȈƷǹȆȸǿǹȐȸƕᘙᅆƞǕŴ
FL ȇǣǹȗȬǤƴƸ
"LOADING" ƕᘙᅆƞǕLJƢŵ
11. ǢȃȗȇȸȈƕ঺ыƢǔƱFL ȇǣǹȗȬǤƴ
"COMPLETED" ƱᘙᅆƞǕLJƢŵӷ଺ƴ"Finished the
DSP code transmitting" ƷȀǤǢȭǰȜȃǯǹƕᘙᅆƞǕ
LJƢŵ
12. OK ǛǯȪȃǯƢǔƱᐯѣႎƴǢȗȪDZȸǷȧȳƕ᧍ơLJ
Ƣŵ
13. ஜೞƷᩓเǛЏǓLJƢŵ