Marantz SR8012 - Menu Map

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
167
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 167
Bass Sync Adjusts the phase shift when there is a delay in the bass (LFE) recorded on a disc. 168
Surround Parameter Adjusts surround sound parameters. 168
M-DAX Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
173
Audio Delay Compensates for incorrect timing between video and audio. 174
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 175
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
and Audyssey LFC
TM
settings.
176
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 179
.
Video
Picture Adjust Adjusts picture quality. 181
HDMI Setup Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. 183
Output Settings Makes settings for video output. 188
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 191
On Screen Display Configures the on-screen display settings. 192
4K Signal Format Set the 4K signal format when the TV or playback device is 4K compatible. 193
TV Format Sets the video signal format to be output for the TV you are using. 194
Contents Connections Playback Settings Tips Appendix
162
Front panel Display Rear panel Remote Index