EasyManuals Logo

Marantz SR8015 User Manual

Marantz SR8015
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
HDMI Control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
Enable the HDMI Control function of this unit.
Set “HDMI Control” to “On”. (v p. 204)
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI Control function for all devices connected
by HDMI cable.
0
Please consult the operating instructions for the connected
devices to check the settings.
0
Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input connected
to this unit.
5
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
6
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0
Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
0
The HDMI ZONE2 function is not compatible with the HDMI Control function.
0
When the HDMI ZONE2 function is used with “HDMI Control” in the menu set to
“On”, the HDMI ZONE2 function may not fully work.
Contents Connections Playback Settings Tips Appendix
159
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR8015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR8015 and is the answer not in the manual?

Marantz SR8015 Specifications

General IconGeneral
Channels11.2
Power Output140 W (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive)
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)175 W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)250 W
70% GuaranteeYes
Total Harmonic Distortion0.05%
Frequency Response10 Hz - 100 kHz
Input Sensitivity200 mV
Signal-to-Noise Ratio102 dB
HDMI Inputs8
HDMI Outputs3
HDMI Version2.1
8K/60Hz Pass-ThroughYes
4K/120Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Low Latency Mode (ALLM)Yes
Variable Refresh Rate (VRR)Yes
Quick Frame Transport (QFT)Yes
Dolby AtmosYes
Dolby Atmos Height VirtualizationYes
DTS:XYes
DTS Virtual:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
HEOS Built-inYes
AirPlay 2Yes
Wi-FiYes
BluetoothYes
EthernetYes
USB PortYes
Phono InputYes

Related product manuals