Marantz SR8015 User Manual

Remote control unit
A
Display
A
LEARN indicator
This is lit when setting the learning function for the remote control unit.
(v p. 288)
B
Information display
0
This displays “AVR” when operating this unit.
0
This displays the input source name when operating an external
device.
0
This displays “TV” when operating TV.
C
l indicator
This is lit when signals are sent from the remote control unit.
B
AVR operation button
When preset codes are registered to the remote control unit, press this
button and then operate the menu on the unit.
C
SET button
This is used for various settings on the remote control unit.
0
“Operating external devices with the remote control unit” (v p. 279)
0
“Operating learning function” (v p. 288)
0
“Setting the back light” (v p. 291)
0
“Specifying the zone used with the remote control unit” (v p. 292)
D
ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit.
0
“Playback in ZONE2/ZONE3” (v p. 178)
0
“Menu operations” (v p. 184)
q
e
w
r
qw e
Contents
Connections Playback Settings Tips Appendix
31
Front panel Display Rear panel Remote Index

Marantz SR8015 Specifications

General

Channels	11.2
Power Output	140 W (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive)
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	175 W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)	250 W
70% Guarantee	Yes
Total Harmonic Distortion	0.05%
Frequency Response	10 Hz - 100 kHz
Input Sensitivity	200 mV
Signal-to-Noise Ratio	102 dB
HDMI Inputs	8
HDMI Outputs	3
HDMI Version	2.1
8K/60Hz Pass-Through	Yes
4K/120Hz Pass-Through	Yes
HDR Support	HDR10, HDR10+, Dolby Vision, HLG
eARC	Yes
Auto Low Latency Mode (ALLM)	Yes
Variable Refresh Rate (VRR)	Yes
Quick Frame Transport (QFT)	Yes
Dolby Atmos	Yes
Dolby Atmos Height Virtualization	Yes
DTS:X	Yes
DTS Virtual:X	Yes
IMAX Enhanced	Yes
Auro-3D	Yes
HEOS Multi-room	Yes
HEOS Built-in	Yes
AirPlay 2	Yes
Wi-Fi	Yes
Bluetooth	Yes
Ethernet	Yes
USB Port	Yes
Phono Input	Yes