Need help?Do you have a question about the Marantz SR8015 and is the answer not in the manual?
General| Channels | 11.2 |
|---|---|
| Power Output | 140 W (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive) |
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) | 175 W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) | 250 W |
| 70% Guarantee | Yes |
| Total Harmonic Distortion | 0.05% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 102 dB |
| HDMI Inputs | 8 |
| HDMI Outputs | 3 |
| HDMI Version | 2.1 |
| 8K/60Hz Pass-Through | Yes |
| 4K/120Hz Pass-Through | Yes |
| HDR Support | HDR10, HDR10+, Dolby Vision, HLG |
| eARC | Yes |
| Auto Low Latency Mode (ALLM) | Yes |
| Variable Refresh Rate (VRR) | Yes |
| Quick Frame Transport (QFT) | Yes |
| Dolby Atmos | Yes |
| Dolby Atmos Height Virtualization | Yes |
| DTS:X | Yes |
| DTS Virtual:X | Yes |
| IMAX Enhanced | Yes |
| Auro-3D | Yes |
| HEOS Multi-room | Yes |
| HEOS Built-in | Yes |
| AirPlay 2 | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Ethernet | Yes |
| USB Port | Yes |
| Phono Input | Yes |
Identify and understand the functions of the front panel controls and indicators.
Detailed layout of all rear panel connectors for audio and video devices.
Learn about the display, operation buttons, and select buttons on the remote.
Learn how to determine speaker system and install speakers for optimal sound.
Guidance on connecting speaker cables and subwoofers correctly and safely.
Steps to connect your TV for video output and TV audio playback via HDMI.
How to connect various playback devices like set-top boxes, DVD players, and consoles.
Steps for connecting the unit to your home network via wired or wireless LAN.
Final step to connect the unit to a power outlet after all connections are complete.
Learn how to turn the unit on and switch it to standby mode.
How to select the desired input source for playback.
Instructions on how to adjust the unit's volume using the remote or main unit.
Explore and select various surround and stereo playback modes.
Pairing and connecting a Bluetooth device to enjoy music wirelessly.
How to output audio to Bluetooth headphones, simultaneously or exclusively.
Link operations between HDMI connected devices using CEC control signals.
Operate and play audio/video in a different room (ZONE2/ZONE3).
Calibrate speakers and room acoustics for optimal performance.
Configure subwoofer settings for direct mode during Audyssey® Setup.
Configure subwoofer settings for standard mode during Audyssey® Setup.
Solutions for power not turning on or automatic power shut-off problems.
Fix problems with remote control operation or display not showing anything.
Steps to resolve no sound from speakers, headphones, or specific connections.
Solutions for no picture appearing on the TV, including connection and format checks.
Resolve problems with AirPlay, Bluetooth, USB, Internet Radio, and network connections.
Detailed specifications for the power amplifier, including rated output and impedance.
To Next Page
