EasyManuals Logo

Marantz SR8015 User Manual

Marantz SR8015
351 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter
information about your home network (LAN) such as the gateway address and subnet mask, etc.
Information
Display network information.
Friendly Name / Connection / SSID / DHCP / IP Address /
MAC Address (Ethernet) / MAC Address (Wi-Fi) /
Wi-Fi signal strength
Connection
Choose whether to connect the home network to a wireless LAN or a
wired LAN.
When connecting to the network using wired LAN, select “Wired
(Ethernet)” after connecting a LAN cable.
When connecting to the network using wireless LAN, select “Wireless (Wi-
Fi)” and configure the “Wi-Fi Setup”. (v p. 256)
o
Connect Using
Select the method for connecting to the home network (LAN).
Wired (Ethernet): Use a LAN cable to connect to a network.
Wireless (Wi-Fi)
(Default):
Use the wireless LAN (Wi-Fi) function to
connect to a network.
Contents Connections Playback Settings Tips Appendix
255
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR8015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR8015 and is the answer not in the manual?

Marantz SR8015 Specifications

General IconGeneral
Channels11.2
Power Output140 W (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive)
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)175 W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)250 W
70% GuaranteeYes
Total Harmonic Distortion0.05%
Frequency Response10 Hz - 100 kHz
Input Sensitivity200 mV
Signal-to-Noise Ratio102 dB
HDMI Inputs8
HDMI Outputs3
HDMI Version2.1
8K/60Hz Pass-ThroughYes
4K/120Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Low Latency Mode (ALLM)Yes
Variable Refresh Rate (VRR)Yes
Quick Frame Transport (QFT)Yes
Dolby AtmosYes
Dolby Atmos Height VirtualizationYes
DTS:XYes
DTS Virtual:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
HEOS Built-inYes
AirPlay 2Yes
Wi-FiYes
BluetoothYes
EthernetYes
USB PortYes
Phono InputYes

Related product manuals