o
Set the distance
0.00 m – 18.00 m / 0.0 ft – 60.0 ft
0
The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Config.” settings. (“Amp Assign” (v p. 232), “Speaker
Config.” (v p. 241))
0
Default settings:
Front L / Front R / Center / Subwoofer 1 / Subwoofer 2 / F. Wide L / F. Wide R /
F. Height L / F. Height R / Front Dolby L / Front Dolby R / Center Height: 3.60
m (12.0 ft)
Speakers other than the above: 3.00 m (10.0 ft)
0
Set the difference in the distance between the speakers to less than 6.00 m
(20.0 ft).
o
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the
ceiling.
0.90 m - 3.30 m / 3.0 ft - 11.0 ft
(Default : 1.80 m / 6.0 ft)
0
This can be set when “Front Dolby”, “Surround Dolby” or “Back Dolby” is set to
“Large” or “Small” in “Speaker Config.”.
o
Set Defaults
The “Distances” settings are returned to the default settings.
Contents
Connections Playback Settings Tips Appendix
247
Front panel Display Rear panel Remote Index