IMPORTANT SAFETY
INSTRUCTIONS
READ
BEFORE OPERATING
EQUIPMENT
This product
was
designed
and
manufactured
to
meet strict quality
and
safety standards. There are, however, some
installation
and
operation
precautions which
you
should
be
particularly aware
of.
1.
Read Instructions -
All the safety and operating instructions
should
be
read
before the product
is
operated.
2.
Retain Instructions - The safety and operating instructions
should
be
retained for future reference.
3.
Heed Warnings - All
warnings
on the product and in the
operating instructions should
be
adhered
to.
4.
Follow
Instructions-
All
operating
and
use
instructions should
be
followed.
5.
Cleaning - Unplug this product from the wall outlet before
cleaning.
Do
not
use
liquid cleaners
or
aerosol cleaners. Use a
damp cloth for cleaning.
6.
Attachments -
Do
not
use
attachments
not
recommended
by
the
product manufacturer
as
they may cause hazards.
7.
Water and Moisture -
Do
not use this product near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub,
in
a wet basement, or near a swimming pool,
and
the like.
8.
Accessories -
Do
not place this product
on
an
unstable cart,
stand, tripod, bracket, or table. The product may
fall,
causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended
by
the manufacturer,
or
sold with the product. Any
mounting of the product should follow the manufacturer's
instructions,
and
should
use a
mounting
accessory
recommended
by
the manufacturer.
9.
A product and cart combination should
be
moved with care.
Quick stops, excessive force,
and
uneven surfaces
may
cause
the product
and
cart combination to overturn.
10.
Ventilation -
Slots
and openings
in
the cabinet
are
provided for
ventilation
and
to ensure reliable operation of
the
product
and
to
protect it from overheating, and these openings must not
be
blocked or covered. The openings should never
be
blocked
by
placing
the
product
on
a
bed,
sofa,
rug,
or
other similar surface.
This product should not
be
placed
in
a built-in
installation
such
as
a bookcase or rack unless proper ventilation
is
provided or the
manufacturer's instructions have been adhered
to.
11
. Power
Sources - This product should
be
operated only from the
type of power source indicated
on
the marking label.
If
you
are
not sure of the type of power supply to your
home,
consult your
product dealer or local power company.
For
products intended
to operate from battery power, or other sources, refer to the
operating instructions.
12.
Grounding or Polarization
- This product
may
be
equipped with a
polarized alternating-current line plug
(a
plug having one blade
wider than the other). This plug
will
fit into the power outlet
only
one way. This
is
a safety feature.
If
you
are unable
to
insert the
plug
fully
into the outlet, try reversing the plug.
If
the plug should
still
fail to fit, contact your electrician to replace your obsolete
outlet.
Do
not defeat the safety purpose of the polarized plug.
AC
POLARIZED PLUG
13.
Mains Cord
Protection
- Mains cord should
be
routed so that
they
are
not likely
to
be
walked
on
or pinched
by
items placed
upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit
from the product.
14.
Protective Attachment
Plug
- The product
is
equipped with
an
attachment plug having overload protection. This
is
a safety
feature. See
Instruction Manual for replacement or resetting of
protective device.
If
replacement of the plug
is
required,
be
sure
the
service technician has used a replacement plug specified
by
the manufacturer that has the same overload protection
as
the
original plug.
15.
Outdoor
Antenna Grounding - If
an outside antenna or cable
system
is
connected to the product,
be
sure the antenna or cable
system
is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810
of the
National Electrical Code,
ANSI/NFPA 70,
provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire
to
an
antenna discharge
unit, size of grounding conductors, location
of
antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode.
See
Figure
1.
16.
Lightning - For added protection for this product during a
lightning storm, or when it
is
left unattended
and
unused for long
periods of time, unplug it from the
wall outlet
and
disconnect the
antenna or cable system. This
will
prevent damage to the
product due
to
lightning and power-line surges.
17.
Power
Lines -
An
outside antenna system should not
be
located
in
the vicinity of overhead power lines or other electric light or
power circuits, or where it can
fall into such power lines or
circuits. When
installing
an
outside antenna system, extreme
care should
be
taken to keep from touching such power lines or
circuits
as
contact with them might
be
fatal.
18.
Overloading -
Do
not overload
wall
outlets, extension cords, or
integral convenience receptacles
as
this
can
result
in
a risk of fire
or
electric shock.
19.
Object
and Liquid Entry - Never push objects of any kind into
this product through openings
as
they may touch dangerous
voltage points or short-out parts that could result
in
a fire or
electric shock. Never
spill liquid of
any kind
on
the product.
To Next Page
Loading...
