What to do if my Marantz Blu-ray Player power does not turn on?
If the power on your Marantz Blu-ray Player does not turn on, consider the following: * Ensure the power cord is properly connected. * Plug the power supply cord into the household power outlet. * The safety protection device may be activated. Unplug the power cord once, wait for 5-10 seconds, and then plug it in again.
How to fix no picture on Marantz UD5007?
If no picture appears on your Marantz Blu-ray Player, try the following: * Ensure the TV's input setting is switched to the external input connected to the player. * If the Pure Direct function is set to “Pure Direct 1” or “Pure Direct 2”, set it to “Off’. * Check if the resolution setting matches the connected device’s resolution. * Make sure the resolution is set correctly for the connected device by pressing RESOLUTION on the remote control. * Verify the HDMI cable is securely connected. * If the HDMI OUT connector is connected to a DVI IN connector, note that DVI connection does not support HDCP, which may prevent correct HDMI output.
Why is there no sound from my Marantz UD5007 or the sound is hard to hear?
If you experience no sound or the sound is hard to hear from your Marantz Blu-ray Player, check these: * Verify the audio connections of connected devices and speakers. * Ensure the connected audio devices are turned on and the input selection is set to the correct input to which the unit is connected. * Confirm that the audio output is properly selected.
What to do if playback won't start on Marantz UD5007?
If playback doesn't start on your Marantz Blu-ray Player, even when you press play, or if it starts and stops immediately, check the following: * Ensure there is no condensation inside the player or on the disc. If there is, let it sit for 1 to 2 hours with the power off. * If the disc is scratched or contaminated with fingerprints, clean it or replace it with a non-scratched disc. * Make sure the disc is loaded correctly, with the side to be played face down. * Verify that the disc is playable. * Ensure that a disc is inserted.
Why is there no sound from my Marantz UD5007?
If there is no sound from your Marantz Blu-ray Player, consider the following: * If the unit is in reverse play, fast forward, fast reverse, slow forward, slow reverse, or pause mode, return to normal playback. * If the HDMI OUT connector is connected to a DVI IN connector, note that DVI connection does not support HDCP, which may prevent correct audio output. * If the Pure Direct function is set to “Pure Direct 1” or “Pure direct 2”, set it to “Off.”
Why does the picture freeze on my Marantz Blu-ray Player?
If the picture on your Marantz Blu-ray Player freezes momentarily during playback, it could be due to: * A scratched or contaminated disc. Clean the disc or replace it with a non-scratched disc. * A problem with the data recorded on the disc.
Why are the buttons not working on my Marantz UD5007 Blu-ray Player?
If the buttons on your Marantz Blu-ray Player do not work or the unit stops responding, it could be due to: * Operations may not be permitted by the disc. * The safety protection device may be activated. Unplug the power cord once, wait for 5-10 seconds, and then plug it in again.
Why is the picture disrupted on Marantz UD5007 Blu-ray Player?
If the picture on your Marantz Blu-ray Player is not displayed or is disrupted, or if a BD-Video or DVD-Video disc is in black and white: * Note that slight picture disturbances may occur right after fast-forwarding or reversing, which is normal. * Ensure that the disc is compatible with the player and has the correct region number (Region code “A” for BD-Video discs, “1” or “ALL” for DVD-Video discs).
How to turn on subtitles on Marantz UD5007 Blu-ray Player?
If subtitles are not displayed on your Marantz Blu-ray Player: * Subtitles cannot be displayed for BD-Video, DVD-Video, or DivX® files that do not contain subtitles. * Check if the subtitle setting is “Off”. Use the disc menu or the SUBTITLE button to set the subtitles to display.
Why can't I read data on my Marantz Blu-ray Player from USB?
If data stored in a USB memory device cannot be displayed (read) on your Marantz Blu-ray Player: * Ensure the unit has initialized the USB memory device with applicable formats (FAT 16/FAT 32). * If using a USB hub or extension cable, directly connect the USB memory device to a USB port on the front panel of the unit. * Confirm the USB memory device contents are applicable to this unit using the “Files” menu. * If a USB memory device of 192 MB or less is formatted with FAT 32, format it with FAT 16. * Note that the unit does not support USB memory devices containing encrypted data.
General| Video Output | HDMI, Component, Composite |
|---|---|
| Ethernet | Yes |
| 3D Playback | Yes |
| Networking | Yes |
| DLNA Certified | Yes |
| Disc Types | BD, DVD, CD |
| BD Profile | Profile 2.0 |
| Audio Output | HDMI, Optical, Coaxial |
| USB | 1 x USB |
| Weight | 4.6 kg |
| Resolution | 1080p |
| Streaming Services | Netflix, YouTube |
To Next Page
