What to do if buttons do not work on Marantz CD Player?
Operations may not be permitted by the disc. If the safety protection device is activated, unplug the power cord once, and wait for 5-10 seconds and then plug it in again. Refer to the instructions of the disc.
Why is there no sound coming from my Marantz CD Player, or why is the sound hard to hear?
Ensure the audio connections of the connected devices and speakers are correctly set up. Verify that the power is on for all connected audio devices and that the input selection is set to the correct input to which the unit is connected. Also, confirm that the audio output is properly selected.
How to troubleshoot no picture on my Marantz CD Player?
Make sure the TV’s input setting is switched to the external input connected to the Marantz CD Player. If the Pure Direct function is set to “Pure Direct 1” or “Pure Direct 2”, set it to “Off”. Check the connection of the video/component video cable. If it is set to “24p Output On” by pressing HDMI MODE on the remote control, no video signals are output from the video and component video terminals during playback of certain discs. Ensure the resolution setting matches the connected device’s resolution. Connect the video cable securely. The HDMI OUT connector may be connected to a DVI IN connector of equipment. DVI connection does not support HDCP and the video is not output correctly.
What to do if my Marantz CD Player power does not turn on?
Check if the power cord is properly connected to both the CD player and the power outlet. Plug the power supply cord into the power outlet. If the safety protection device is activated, unplug the power cord, wait 5-10 seconds, and then plug it back in.
Why is there no sound from my Marantz CD Player?
The unit may be in reverse play, fast forward, fast reverse, slow forward, slow reverse or pause mode. Return to the normal playback. The HDMI OUT connector is probably connected to a DVI IN connector of equipment. DVI connection does not support HDCP and the audio is not output correctly. If the Pure Direct function is set to “Pure Direct 1” or “Pure direct 2”? Set it to “Off.”
What to do if the picture freezes momentarily during playback on my Marantz CD Player?
If a disc is scratched or contaminated with fingerprints, it may not play correctly. Clean the disc or replace it with a non-scratched disc. There may also be a problem with the data recorded on the disc.
Why the camera angle does not switch on my Marantz CD Player?
If the multiple angles are not recorded in a BD-Video or DVD- Video, the camera angle cannot be switched. Also, multiple angles may only be recorded for specific scenes.
Why playback does not start when a title is selected on Marantz CD Player?
Playback may be prohibited by the viewing restriction setting. Check the “Ratings” setting on the GUI menu.
How to troubleshoot BD-LIVE / bonus view playback issues on Marantz CD Player?
Make sure the USB memory device has more than 1 GB of available space. Check if the USB memory device has been initialized by the unit. Ensure the USB memory device was inserted while the power of the unit was in the standby status.
How to enable HD audio output on Marantz CD Player?
Set “BD Audio Mode” to “HD Audio Output.”
General| 3D | - |
|---|---|
| Depth | 331 mm |
| Width | 440 mm |
| Height | 107 mm |
| Weight | 4300 g |
| Full HD | Yes |
| Aspect ratio | 16:9 |
| HDMI version | 1.4a |
| Product color | Gold, Silver |
| Audio decoders | Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD |
| Internal memory | 1024 MB |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Disc types supported | BD, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Dynamic range (1kHz) | 100 dB |
| Playback disc formats | CD audio, CD video |
| Supported video modes | 1080p |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | MP3, WMA |
| Image formats supported | JPG |
| Video formats supported | AVCHD, DIVX, H.264, MPEG, WMV |
| Digital audio optical out | 0 |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 27 W |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Audio output channels | 7.1 channels |
| Total Harmonic Distortion (THD) | 0.0025 % |
Provides essential safety guidelines for operating the appliance.
Details compliance information for US customers regarding FCC rules.
Lists crucial warnings for handling the unit and media.
Provides precautions for properly installing the unit.
Lists the supplied parts and accessories for the product.
Highlights the key capabilities and technologies of the UD5005 player.
Provides guidelines for safely handling the unit to prevent damage.
Instructions for connecting the unit to a TV or AV receiver.
Steps to power on the unit and connected devices.
Guide for configuring audio output settings for HD audio playback.
Instructions on how to play discs and navigate playback.
Guides on how to connect the unit to TVs and AV receivers.
Explains how to play discs and navigate playback controls.
Covers fundamental settings like display brightness and audio output.
Details connecting to USB memory devices and networks for extended functionality.
Explains advanced playback via Home menu and detailed system configurations.
Addresses common problems related to video, audio, and disc playback.
Troubleshoots problems with USB devices, network connectivity, and BD-LIVE.
Details what the warranty covers and excludes for defects.
Provides instructions on obtaining repair service under warranty.
Clarifies limitations on liability for damages beyond product repair.
Details warranty coverage and exclusions for product defects.
Explains the process for obtaining warranty service and support.
Outlines limitations on Marantz's liability for damages.
To Next Page
