To Next PageTo Next Page
Need help?Do you have a question about the Marathon Slim Jumbo Atomic and is the answer not in the manual?
Identifies front controls: radio icon, time display, indoor/outdoor temp, date, weekday, frequency icon, set buttons.
Identifies back controls: sync, temp, wave, DST, time zone, RCC switches. Also wall mount hole, battery compartment, and stand.
Insert 4x AA batteries, observe polarity. Place unit on flat surface or wall mount near window for signal reception.
Low battery icon notification. Details outdoor remote sensor components: display, mount hole, reset, battery compartment, probe connection.
Enables automatic time sync via WWVB radio signal; explains signal connection indicators and reception.
Adjusts for DST using AUTO/ON/OFF switch; selects from 8 time zones via TIME ZONE switch.
Steps for manually setting time, date, month, year, and format when RCC is OFF.
Outdoor sensor transmits temperature; main unit searches for signal. Troubleshooting sync loss explained.
Optional probe for extreme temperatures (-50°C to 70°C), connects to outdoor sensor for refrigerator monitoring.
Procedure to enter alarm setup, set hour/minute, and exit. Auto-exit after 15 seconds of inactivity.
Using the alarm button to activate/deactivate. Alarm sounds for 2 minutes if not stopped.
Instructions for Celsius/Fahrenheit, handling out-of-range readings, and technical specifications for temperature ranges and intervals.
Avoid battery removal impact, excessive force, extreme conditions, direct sunlight, dust, moisture, and corrosive cleaners.
Device compliance with FCC Part 15 rules and Innovation, Science and Economic Development Canada's license-exempt RSS.
Provides company contact details, website, design/manufacturing origin, and 2-year warranty information.
General