Marbella VR4 - Language; TV Mode

32
© 2016 Ma k a T e c hnologie s G roup . A ll Righ ts Re s er v ed .
Getting Started
Operation of your VR4 F HD Digital Roadcorder
TM
Language
The available language may vary depending on the region.
1 Press on MENU twice to enter system setting
2 Press on DOWN button to navigate to the function that shows language
3 Press OK and enter showing English etc.
4 Press on the UP or DOWN button to make your selection
5 Press on OK to confirm your entry and back to system setting
6 Press on MENU once to exit Setting
TV Mode
Please set accordingly to match the local TV visual quality of content.
1 Press on MENU twice to enter System Setting
2 Press on UP or DOWN button to navigate to the function that shows
TV Mode.
3 Press on OK to enter and show : NTSC/ PAL
4 Press on the UP or DOWN button to make your selection
5 Press on OK to confirm your entry and exit selection
6 Press on MENU once to exit Setting
Note : Recommened to set the mode : PAL (Common usage in Asia)